1/2 inch torque wrench with push-through square drive and fine-toothed ratchet head
Torque wrench, ratchet, fine head
TRQWRNCH-PSHTHRG-1/2IN-(20-100NM)
Art.-no. 071471 22
EAN 4011231722988
Register now and access more than 125,000 products
- Accuracy of ± 3 % to the set value
- Simple and precise setting by turning the handle
- Switchover and/or push-through square drive
- Scaling in both newton metres (Nm) and pound-force feet (lbf·ft)
- Audible and tangible perception of torque triggering prevents over-tightening of bolts
- Anti-slip 2-component handle
- With calibration certificate
Torque wrenches are precision tools that must be checked at regular intervals with suitable measuring equipment and adjusted if necessary. We recommend annual calibration by our Master Service.
Datasheets(X)
After use, relax spring and set to lowest value.
 | |
Tip size | 1/2 inch |
Min./max. torque measuring range | 20-100 Nm |
Min./max. torque measuring range (inches) | 15-80 lbf.ft |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Scale value torque | 1 Nm |
ISO | DIN EN ISO 6789-1:2017 |
Length (L1) | 350 mm |
Length of lever (L2) | 330 mm |
Ratchet head height (B1) | 22 mm |
Ratchet head height with square (B2) | 37 mm |
Handle diameter (D1) | 37 mm |
Last viewed
Lid for storage boxes in sizes 2/3/4
X-Finity T-shirt
Hose pinch-off pliers set for flexible hoses and lines without metal fabric
Awl
Amo® III 7.5 type 2 window frame screw Socket head, 8.0 mm, zinc plated steel, blue passivated, RW 30 drive
Stud with threaded end ≈ 1.25 d DIN 939, steel 5.8, plain
Rubber block set 12 pieces
Glue dispenser unit For glue application
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1 Steel 8.8U, hot-dip galvanised
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)