45° connection piece For hard-to-reach lubrication and manifold points
Connection piece 45 degree
FITT-CLS-ANGLPIECE-45D-M10X1KEG-M10X1
Register now and access more than 125,000 products
On central low-viscosity grease lubrication units:
Lines with a diameter of 4 mm are connected to connection pieces with tapered rings and union bolts M8x1.
On central grease lubrication units:
Lines with a diameter of 6 mm are connected to connection pieces with double-tapered rings and union bolts M10x1.
Datasheets(X)
For connection of a line to a lubrication or divider manifold point if an insertable or cutting-ring fitting cannot be screwed in directly.
 | |
Connection thread (d2) | M10 x 1 |
Outlet thread (d) | M10 x 1 tapered |
Width across flats (SW) | 13 mm |
Length (L) | 23 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Copper spray CU 800
Staples for hand-held stapler and hammer tacker
Nozzle for pneumatic rivet nut gun device PEG 312
1/4-inch socket wrench insert hexagon, with magnet
Vehicle cable FLY
Double cylinder S5 locking system
Abrasive cloth roll For ORSY®10 dispenser systems
Straight pin, unhardened DIN 7, A1 stainless steel, plain
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain