45° connection piece For hard-to-reach lubrication and manifold points
Connection piece 45 degree
FITT-CLS-ANGLPIECE-45D-M8X1KEG-M8X1
Register now and access more than 125,000 products
On central low-viscosity grease lubrication units:
Lines with a diameter of 4 mm are connected to connection pieces with tapered rings and union bolts M8x1.
On central grease lubrication units:
Lines with a diameter of 6 mm are connected to connection pieces with double-tapered rings and union bolts M10x1.
Datasheets(X)
For connection of a line to a lubrication or divider manifold point if an insertable or cutting-ring fitting cannot be screwed in directly.
 | |
Connection thread (d2) | M8 x 1 |
Outlet thread (d) | M8 x 1 tapered |
Width across flats (SW) | 13 mm |
Length (L) | 23 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Threaded rod with trapezoidal thread WN 976 with trapezoidal thread in accordance with DIN 103
Useit® Superpad wood sanding disc
Concealed hinge, TIOMOS Impresso 120
Stirrup handle Stainless steel FINISH
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Grommet Brass, MS 63 F 30, nickel-plated
Dispenser For adhesive-free latex-free plasters
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Bevelled-edge chisel
Repair hose line, NBR/textile For non-fuel-carrying applications