90° connection piece For hard-to-reach lubrication and manifold points
Connection piece 90 degree
FITT-CLS-ANGLPIECE-90D-M10X1KEG-M10X1
Register now and access more than 125,000 products
On central low-viscosity grease lubrication units:
Lines with a diameter of 4 mm are connected to connection pieces with tapered rings and union bolts M8x1.
On central grease lubrication units:
Lines with a diameter of 6 mm are connected to connection pieces with double-tapered rings and union bolts M10x1.
Datasheets(X)
For connection of a line to a lubrication or divider manifold point if an insertable or cutting-ring fitting cannot be screwed in directly.
 | |
Connection thread (d2) | M10 x 1 |
Outlet thread (d) | M10 x 1 tapered |
Width across flats (SW) | 13 mm |
Length (L) | 23 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Façade construction screw Faba® type BZ with hexagon head
DUO-S impact drill bit with straight shank
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
SUB Basket floor unit pot drawer
Façade construction screw Faba® type A with hexagon head and sealing washer
Countersunk tapping screw, shape C with AW drive WN 112-compliant, steel, zinc-plated, blue passivated (A2K), shape C, with tip
K Plus insulation pipe clamp With separate insulation part