Welcome to Würth Slowakia For trade customers only

A/C leakage stop additive For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units

Air-conditioning leak stop additive
SEAL-A/C-LEAKSTOPADDITIVE-30ML

Art.-no. 0892764500
EAN 4056807824260
Price for selected packaging unit
A/C leakage stop additive For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units

Art.-no. 0892764500

Price for selected packaging unit
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units.

TCP reduces wear


  • Longer compressor service life

  • Improves the compressor service life

  • Reduces noises developing in the compressor

  • (Tri-cresyl-phosphate) Additive specifically developed for vehicle air-conditioning compressors for reducing mechanical wear (friction) in the compressor (piston etc.)


Compatible with PAG and ester oil

Notice

Not suitable for sealing leaks on metallic components (evaporator, compressor, condenser etc.).

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units.

Instructions

Connect the A/C leakage stop additive to the adapter, insert into the application gun and mix in via the high-pressure side of the cooling system (engine must be switched off).

Contents

30 ml

Smell/fragrance

Odourless

Chemical basis

Methylene diphenyl

Water-soluble

Yes

Vapour pressure

1.33 Pa

Conditions for vapour pressure

at 20°C

Colour

Light yellow transparent

Min. flashing point

255 °C

Density

1.02 g/cm³

Viscosity/consistency

Liquid

Shelf life from production

48 Month

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 5
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information