ABS Lock Falz IV ST ZW
Anchor point ABS Lock IV, standing seam ZW
LOCK SEAM 4 (PF-4-ZW-ST) ZW F. STANDSEAM
Register now and access more than 125,000 products
The anchor point ABS-Lock Falz IV standing seam ZW is used in safety harness systems. It is used where obstacles need to be bridged, so that the tensioned stainless steel cable of the safety harness system is not supported.
The anchor point ABS-Lock Falz IV standing seam ZW is certified as a component exclusively in safety harness systems.
Datasheets(X)
- DIN EN 795:2012, C + DIN CEN/TS 16415:2013
- Clamped penetration-free to the seam
- Attachment at only a single seam
- For example Rheinzink and similar, also copper standing seam (CU)
- Only for safety harness systems
- Incl. mounting set
The stainless steel intermediate bracket is attached using aluminium clamps that have the right profile for standing seams. The clamps make assembly possible without causing damage to the roof panels. This allows you to install a reliable anchoring point for several persons operating on metal seam roofing while safeguarding its watertightness.
Material | Stainless steel |
Rod length | 0 mm |
EN standard | 795 |
Suitable for use in the following materials | Standing seam |
Type description | PF-4-ZW-ST |
Height | 0 mm |
Surface | Stainless steel FINISH |
Last viewed
ASSY® 4 CSMP ZiNi timber screw Steel zinc-nickel partial thread countersunk milling pocket head
Flat connector contact Micro Timer (MT II+III) 1.6
Hose clamp with asymmetrical lock
Hexagonal nut with clamping piece (all-metal) ISO 7042, steel 8, hot-dip galvanised (hdg)
Twist drill bit SMART STEP EU+ HSS DIN 338
Plus Longlife & Speed tile chisel
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
1/4 inch socket TX IP
ISO 15981 blind rivet assortment, round pan head In system case 4.4.1. Aluminium
Compartment separator For drawer cabinets