ABS Lock III BE
Anchor point ABS Lock III BE, drive into flat roof
LOCK3 CONCRETE(L3-BE-500)DRIVE-IN 500 MM
Register now and access more than 125,000 products
The support of the ABS-Lock III-BE has a diameter of 16 mm and is made of malleable stainless steel. The anchoring device boasts not only simple installation, but also general technical approval (abZ - allgemeine bauaufsichtliche Zulassung) from the German Institute for Construction Technology (DIBt - Deutsches Institut für Bautechnik). A great reassurance for planners and professional associations.
Each ABS-Lock III-BE is supplied as standard with a stainless steel anchor ring, which you simply screw onto the upper thread. To protect the thread from hammer impact damage during installation, our range includes a special hammering aid L3-BE-EH.
When hammering in the Lock III BE, the hammering aid protects the thread from damage.
Datasheets(X)
For hammering into concrete.
Drill hole, hammer in securing device, fall arrester is in place. With the ABS-Lock III-BE for flat concrete roofs, your assembly outlay is greatly reduced. Installation of the anchor point takes barely 2 minutes, and it can also be used as a support element for safety harness systems.
Material | Stainless steel |
Rod length | 500 mm |
EN standard | 795 |
Suitable for use in the following materials | Concrete |
Type description | L3-BE-500 |
Height | 500 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Threaded pin ISO 4027, steel 45H, zinc-plated, blue passivated (A2K)
Bit box, size 3 33 pieces
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Concealed hinge, Nexis click-on 170
Microfibre cloth BASIC
Sandpaper roll Useit® Superpad vehicle
Hexagonal cap nuts, high profile DIN 1587, polyamide 6.6, natural
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
Slotted cheese head DIN 84, brass, plain
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain