ABS lanyard Temporary rope safety system
ABS ASK 8 rope protection system
TEMPORARY CABLE 12 MM(PS-1013-30) 30 M
Register now and access more than 125,000 products
The ABS lanyard can be used as a temporary rope safety system for horizontal use on flat and steep roofs.
But the ABS lanyard offers even more
Common arresting equipment usually uses twisted ropes. These are not only significantly heavier than kernmantle ropes, but wear out more quickly because of their tendency to split. The kernmantle rope of the ABS lanyard, on the other hand, is considerably more stable and resistant to wear and tear. Splitting is not possible with kernmantle rope, and because the ABS lanyard takes on significantly less moisture than its twisted polyamide counterpart, it is more weatherproof.
Other advantages of the ABS lanyard
The system is approved for a maximum support spacing of 21 metres, and as the kernmantle rope stretches less than conventional rope in the event of a fall, the fall distance is reduced.
- Incl. adjustable rope shortener
- Incl. Fall dampener
- Secures up to 4 people at the same time
- Incl. free threaded snap hook (15 m = 1 unit, 23 m = 2 units, 30 m = 3 units)
- DIN EN 795:2012 and DIN CEN/TS 16415:2017
- DIN EN 353-2:2002 and DIN EN 358:2000
- Edge-tested kernmantle rope (dia. 12 mm) in accordance with RFU CNB/P/11.075
Datasheets(X)
The ABS lanyard has been developed to simultaneously secure up to 4 people. One end of the kernmantle rope has a snap hook with screw locking device for easy and secure mounting to stop points. At the other end of the rope is a cable clamp as clamping element. In addition, the ABS lanyard has freely-movable snap hooks for attaching to intermediate brackets.
Length | 30 m |
EN standard | 795 |
Material | Nylon (polyamide) |
Wire cable diameter | 12 mm |
Type description | PS-1013-30 |
Colour | Red |
Weight | 4489 g |
Last viewed
Wide sanding belt
Low-strength hydraulic sealant
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Slotted cheese head screw
Screw cap for number plate screw
Lock For ORSY® BULL drawer box
Thin-walled heat-shrink hose Without internal adhesive
W-VIZ-A anchor rod, A4 stainless steel for W-VIZ/A4 injection systems (concrete)
1/4 inch socket wrenches Assortment of 16 pieces
Cone grease nipple Angled shape 90° DIN 71412 shape C, zinc-plated steel