Abrasive fleece matting body For impressive surfaces, cleaning oxide coatings and removing discolouration
Sanding fleece matting body
MATBDY-FLC-G100-40X20X6MM
Register now and access more than 125,000 products
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Diameter x width x shaft diameter | 40 x 20 x 6 mm |
Max. rotation speed | 15000 1/min |
Max. recommended rotation speed | 7500 1/min |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Last viewed
Fixanchor W-FAZ/A4
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Hexagon socket set screw with pin ISO 4028, steel, 45H, plain
Steel spacer stud
E 6.3 PH bit (1/4 inch)
Hexagon nut with trapezoidal thread
Allen key, hexagon socket
Hammer drill bit Plus Duo-S Vario
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Hexagon head sealing plug with collar DIN 910, steel, zinc-plated, blue passivated (A2K)