Abrasive fleece matting body For impressive surfaces, cleaning oxide coatings and removing discolouration
Sanding fleece matting body
MATBDY-FLC-G100-50X30X6MM
Register now and access more than 125,000 products
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Diameter x width x shaft diameter | 50 x 30 x 6 mm |
Max. rotation speed | 12000 1/min |
Max. recommended rotation speed | 6000 1/min |
Material to be processed | Forged steel |
Last viewed
Solid carbide radius cutter, short, quad blade
Lid For storage boxes in sizes 2/3/4
Wing screw, square wings Similar to DIN 316, steel 4.8, zinc-plated, blue passivated (A2K), pressed
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Locksmith tool case Junior II 67 pieces
Protective glove White PU
Winding wire
Tarpaulin repair system, patch set 32 pieces
Assembly wedge set
Bag pressure piston