Welcome to Würth Slowakia For trade customers only

Active Clean vehicle cleaner

Cleaner for vehicle Aktiv-Clean
CLNR-VEH-IN-(ACTIVE-CLEAN)-500ML

Art.-no. 0893472
EAN 4046777041941

Price for selected packaging unit
Active Clean vehicle cleaner

Art.-no. 0893472

Price for selected packaging unit
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Intensive foam cleaner for the entire vehicle interior

Micro-fine active foam (vacuum effect)


  • Foam remains on the surface and actively draws out the dirt when the foam bubbles burst

  • Outstanding dirt-dissolving power

  • Upholstery does not become wet, meaning drying times are shorter


Gentle on materials, suitable for all surfaces in the vehicle interior. The pre-determined breaking points of the airbag are not affected.



20x yield


  • 500 ml Active Clean equates to the yield of approx. 10 litres of liquid cleaning product

  • Saves money

Notice

Protect product from frost.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Instructions

Spray Active Clean onto a clean, dry cloth and wipe over the areas to be treated. Treat plastic parts with cockpit care afterwards. With fabrics and upholstery, let the foam take effect briefly and remove any soiling with a brush or sponge where necessary. With spots, work from the outside inwards. Then vacuum the upholstery.

Contents

500 ml

Container

Aerosol can

Smell/fragrance

Fruity

Colour

Colourless

Chemical basis

Water, soap and glycol

pH value

7.7

Min. flashing point

0 °C

Shelf life from production

24 Month

Bio-degradable

Yes

AOX-free

Yes

Silicone-free

Yes

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 5
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information