Adhesive lubricant HHS<SUP>®</SUP> 1000 - ADHLUB-HHS1000-500ML

Adhesive lubricant HHS<SUP>®</SUP> 1000 - ADHLUB-HHS1000-500ML - 1

Adhesive lubricant HHS<SUP>®</SUP> 1000 - ADHLUB-HHS1000-500ML - 2

Adhesive lubricant HHS<SUP>®</SUP> 1000 - ADHLUB-HHS1000-500ML - 3

Adhesive lubricant HHS^® 1000

Name: Adhesive lubricant HHS ® 1000
Brand: Würth
SKU: 08931064

Adhesive lubricant HHS 1000
ADHLUB-HHS1000-500ML

Art.-no. 08931064

EAN 4050641111098

All versions

Similar products

Price for selected packaging unit

Adhesive lubricant HHS^® 1000

Art.-no. 08931064

Price for selected packaging unit

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

Centrifuge-proof, low-viscosity grease with dual effect combines the creeping properties of an oil with the adhesion and pressure resistance of a grease

Dual effect

After spraying, it behaves like an oil due to its good creeping properties

After flashing off, it behaves like a grease due to its excellent adhesion

Oil formula

Good creeping and gap penetrating ability

Offers long-lasting corrosion protection

Easily reaches areas that conventional greases cannot

Grease formula

Long-lasting lubricant with excellent adhesion

Lubricant does not shear on fast-turning and rotating parts

Good material compatibility

Protects and maintains O-rings and X-rings

Does not affect painted base materials

Plastic compatibility due to special formula

Further advantages

Excellent noise and vibration dampening

Lubricating film that is extraordinarily tear-proof even at high pressure loads

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For professional use for lubrication under difficult re-lubrication conditions during maintenance and repair, such as re-lubrication of wire ropes, joints, rails, chains.

Instructions

Shake can well before use

Thoroughly clean the points to be lubricated before application

Then spray evenly onto the cleaned surface

Chemical basis	Mineral oil
Oil basis	Synthetic
Colour	Yellowish
Smell/fragrance	Characteristic
Density	0.773 g/cm³
Density conditions	at 20°C
Min. temperature conditions	-25 °C
Max. temperature conditions	170 °C
Kinematic oil basis viscosity	2000 cSt
Conditions for viscosity of oil basis	at 40°C, in accordance with DIN 51562
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
Resistance against	Salt water, Weak lyes, Weak acids, Splash
Material compatibility	O- and X-Ring, Plastic, Coated Surfaces
Contents	500 ml
Shelf life from production	36 Month

Additive article:

Product

Description

Quantity

Price
/PU

HHS<SUP>®</SUP> Clean adhesive lubricant pre-cleaner

HHS® Clean adhesive lubricant pre-cleaner

PRECLNR-(HHS CLEAN)-500ML

Art.-no. 089310610

Highly effective pre-cleaner + adhesion promoter (primer function) specifically matched to HHS products

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Vinyl chemical and moisture protective glove

Description:

Permeation level: 3

Fully dipped protective glove with vinyl coating on cotton jersey lining

Chemical protective glove, Butyl

Description:

Permeation level: 2

Gas-tight and resistant to exhaust gases produced by combustion processes

Chemical protective glove PVC w. backing fabric

Description:

Permeation level: 2

Very robust, submersible PVC glove with cotton support fabric

Nitrile chemical protective glove with cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove long, heavy-duty design

Description:

Permeation level: 6

Chemical protective glove chloroprene

Description:

Permeation level: 2

Heavy-duty design

Chemical protective glove nitrile with backing fabric

Description:

Permeation level: 5

Robust, liquid-tight protective glove with polyamide support fabric that combines optimum chemical protection, secure grip and comfort

Disposable nitrile glove

Description:

Permeation level: 2

Liquid-proof, food-safe disposable glove

Disposable nitrile grip glove

Description:

Permeation level: 2

Unique, diamond texture for optimal grip

Disposable glove Nitrile Grip Comfort

Description:

Permeation level: 3

Very robust disposable gloves with excellent grip thanks to special nubs and maximum wearing comfort thanks to cotton flocking inside

Disposable gloves, nitrile, extra strong, type A

Description:

Permeation level: 4

Durable and robust disposable gloves with excellent chemical protection

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.