Adhesive lubricant HHS 2000® PLUS
Adhesive lubricant HHS 2000 PLUS
ADHLUB-HHS2000PLUS-400ML
HHS
Register now and access more than 125,000 products
Universal, synthetic high-performance adhesive lubricant with outstanding lubricating properties thanks to the addition of boron nitride
Extreme adhesion and pressure resistance
Extremely good adhesion immediately on spraying prevents droplet formation and contamination while at the same time offering extremely good pressure resistance.
Reliable wear protection
The boron nitride allows a wide temperature range and long-lasting lubricating effect. If the oil lubrication breaks off at higher temperatures (above 180°C), the boron nitride takes over the lubrication up to 1000°C (dry lubrication).
Free of microplastics
Free of silicone, resin, acid and n-hexane
Physiologically safe lubricant; ideally suited for the food processing industry. NSF H1-registered.
Datasheets(X)
For professional use in high pressure applications, under high ejection forces or overhead such as on Bowden cables, bolts, joints, hinges, sliding rails, sprockets, toothed racks or open gears.
Shake can well before use. Thoroughly pre-clean the parts to be treated. Then spray onto the cleaned surface.
Chemical basis | Synthetic oil |
Oil basis | Synthetic |
Colour | Whitish |
Smell/fragrance | Characteristic |
Density | 0.855 g/ml |
Density conditions | at 20°C |
Min. temperature conditions | -40 °C |
Max. temperature conditions | 180 °C |
Max. temperature resistance | 1000 °C |
Min. flashing point of active ingredient | 200 °C |
Min. flashing point | 200 °C |
Flashing point conditions | 0 - not applicable |
Kinematic oil basis viscosity | 612 cSt |
Conditions for viscosity of oil basis | 0 - not applicable |
Silicone-free | Yes |
Acid-free | Yes |
Resin-free | Yes |
Resistance against | Weak lyes, Weak acids, Splash |
Contents | 400 ml |
Weight of content | 377 g |
Shelf life from production | 24 Month |
Sustainability | Pollutants / Emissions |
Last viewed
Universal safety sliding tips
pias® drilling screw, raised countersunk head with AW drive
Hand Sanding Blocks with Extraction
Union nut for Kombifix pneumatic cartridge gun
Solid rubber wheel With plastic rim for steel cylinder rollers
Rod lashing rail
Socket wrench 3/8 inch For oil filter and filter caps
Slotted countersunk head screw DIN 963, steel 4.8, zinc-plated, blue passivated (A2K)
Knob With recessed handle
Battery charger 12/24 V 8 A lithium/lead 10-240 Ah