Adhesive lubricant HHS<SUP>®</SUP> 500 - ADHLUB-HHS500-500ML

Adhesive lubricant HHS<SUP>®</SUP> 500 - ADHLUB-HHS500-500ML - 1

Adhesive lubricant HHS<SUP>®</SUP> 500 - ADHLUB-HHS500-500ML - 2

Adhesive lubricant HHS<SUP>®</SUP> 500 - ADHLUB-HHS500-500ML - 3

Adhesive lubricant HHS^® 500

Name: Adhesive lubricant HHS ® 500
Brand: Würth
SKU: 08931065

Adhesive lubricant HHS 500
ADHLUB-HHS500-500ML
HHS

Art.-no. 08931065

EAN 4050641111357

All versions

Similar products

Price for selected packaging unit

Adhesive lubricant HHS^® 500

Art.-no. 08931065

Price for selected packaging unit

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

EP long-life spray grease for excellent protection against weathering and environmental influences

Low adhesion of dust and dirt

Ideal for open lubrication outdoors

Longer lubricating grease life

Outstanding sealing behaviour

Extends lubrication intervals

Resistant to salt water and spray water, weak acids and bases

Outstanding corrosion protection

Lubricant does not wash off

Resistant to oxidation

High pressure load of lubricated parts

EP (extreme pressure) additives for extremely high pressure resistance

Outstanding noise and vibration damping

Minimises wear and substance loss of lubricating points

Reduces friction temperature which extends the lubricating effect

Low wear

Free from silicone, resin and acids

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

EP long-life spray grease with a high protective factor against weathering and environmental influences.

Suitable for exposed lubricating points with heavy dirt and weather influences, e.g. gearwheels, bearings, wire cables, spring balancers, slide bearings and much more. HHS 500 is ideally suited for exposed outdoor lubrication thanks to its low adhesion of dust and dirt. The highly viscose spray grease with anti-wear and anti-corrosive properties is also ideal for lubricating door pins, hinges, slide rails, chains, chain wheels, cable winches, spindles, gearwheels, toothed racks and much more.

Instructions

Shake can well before use. Thoroughly pre-clean the points to be lubricated with HHS^® Clean, art. no. 089310610 Then spray evenly on the clean surface from a distance of 20-30 cm.

Chemical basis	Synthesis of fat and additives in hydrocarbon solvents
Oil basis	Synthetic / mineral oil combination
Colour	Opal green
Smell/fragrance	Characteristic
Density	0.78 g/cm³
Min. temperature conditions	-25 °C
Max. temperature conditions	150 °C
Min. flashing point of active ingredient	0 °C
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
Contents	500 ml
Shelf life from production	36 Month

Additive article:

Product

Description

Quantity

Price
/PU

HHS<SUP>®</SUP> Clean adhesive lubricant pre-cleaner

HHS® Clean adhesive lubricant pre-cleaner

PRECLNR-(HHS CLEAN)-500ML

HHS

Art.-no. 089310610

Highly effective pre-cleaner + adhesion promoter (primer function) specifically matched to HHS products

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.