Welcome to Würth Slowakia For trade customers only

Adhesive lubricant HHS® 6000 PLUS

Adhesive lubricant HHS 6000 PLUS
ADHLUB-HHS6000PLUS-400ML
HHS

Art.-no. 0893106202
EAN 4065746088077

Price for selected packaging unit
Adhesive lubricant HHS® 6000 PLUS

Art.-no. 0893106202

Price for selected packaging unit
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

High-performance lubricating oil for extreme speeds with outstanding lubricating properties due to the boron nitride additive

Effective application


  • Eliminates creaking and squeaking noises

  • Excellent creeping properties for deep lubrication and protection


Reliable adhesion and protection


  • Very good, long-lasting lubricant

  • Effective surface protection against wear and corrosion


Extreme resilience


  • Boron nitride allows a wide temperature range for consistent lubrication

  • In the event of oil attenuation above 180 °C, boron nitride takes over lubrication up to 1,000 °C (dry lubrication)

  • Free of microplastics


Maximum efficiency


  • Low viscosity for extreme ease of movement and friction reduction

  • Optimal performance even at extremely high speeds
Notice
  • Can be used in the food sector due to NSF certification

  • NSF-registered in accordance with NSF H1: The product may come into contact with foodstuffs for technical reasons

  • If used in areas in which food is processed or stored, only the minimum quantity technically required may be used. If the product is to be used as an anti-corrosive film, it must be completely removed before the device in question is used again.
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For professional use with the smallest tolerances, precision parts or even with high temperature loads, e.g. on bearings, chains, joints, springs, sliding rails or Bowden cables.

Instructions
  • Shake can well before use

  • Thoroughly clean the points to be lubricated before application

  • Then spray evenly onto the cleaned surface

Chemical basis

Synthetic oil

Oil basis

Synthetic

Colour

Yellowish

Smell/fragrance

Odourless

Density

0.834 g/ml

Density conditions

at 20°C, DIN 51757

Min. temperature conditions

-40 °C

Max. temperature conditions

180 °C

Max. temperature resistance

1000 °C

Min. flashing point of active ingredient

200 °C

Min. flashing point

200 °C

Kinematic oil basis viscosity

31 mm²/s

Conditions for viscosity of oil basis

at 20°C

Silicone-free

Yes

Acid-free

Yes

Resin-free

Yes

Resistance against

Aging

Contents

400 ml

Weight of content

333.6 g

Shelf life from production

24 Month

Sustainability

Pollutants / Emissions

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information