Adhesive lubricant HHS®100
Adhesive lubricant HHS 100
ADHLUB-HHS100-400ML
HHS
Register now and access more than 125,000 products
Effective lubricant distribution and noise reduction
- Eliminates creaking and squeaking noises
- Good creeping and gap penetrating ability, even in hard-to-reach areas
- Effective penetration into vertical spaces to prevent running and escape of lubricant
Dirt-repellent
- After application, the wax forms a protective layer on the surface
- Beading effect protects surface from dirt and contamination
- Resistant to weather conditions
Long-lasting protection and stability
- Long-lasting lubricant with excellent adhesion
- Lubricant does not shear on fast-turning and rotating parts
- Offers long-lasting corrosion protection
- Low wear on lubricated surfaces
Versatile, gentle and resistant
- Protects and maintains O-rings and X-rings
- Does not affect painted base materials
- Plastic compatibility due to special formula
Contains PTFE solid lubricant
- Reduction of friction temperature for longer lubrication
- Good emergency running properties
- This product is not subject to the viscosity classification
- Shortly after being sprayed on, the product forms a highly effective, wax-based dry lubricating film, thereby ensuring optimum corrosion protection
Datasheets(X)
For professional use for lubrication under difficult re-lubrication conditions during maintenance and repair, such as re-lubrication of wire ropes, joints, rails, chains.
- Shake can well before use
- Thoroughly clean the points to be lubricated before application
- Then spray evenly onto the cleaned surface
Chemical basis | Synthetic wax oxidant |
Oil basis | Synthetic wax |
Colour | Yellow, Brown |
Smell/fragrance | Characteristic |
Density | 0.714 g/cm³ |
Min. temperature conditions | -30 °C |
Max. temperature conditions | 100 °C |
Min. flashing point | 130 °C |
Silicone-free | Yes |
Acid-free | Yes |
Resin-free | Yes |
AOX-free | Yes |
Resistance against | Weak lyes, Weak acids, Splash |
Pour point | -20 °C |
Contents | 400 ml |
Shelf life from production | 24 Month |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Nail anchor SHARK® Hammer TYPE PK A2
Nail sealing tape Butyl EURASOL®
1/2 inch torque wrench With push-through square drive and fine-toothed ratchet head
Stainless anchor rod, product sold by metre A4 stainless steel
Short adapter Mini 13-pin to 7-pin 12V
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Nail anchor SHARK® Hammer TYPE GEW
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal nut with collar, 1.5xd high DIN 6331, steel 10, plain
Mudguard pincers