Angle screw-in connection piece For central lubrication units
Angled screw-in connector connection
FITT-CLS-(SCREWIN-SCKT)-ANGL-D6-M10X1KEG
Register now and access more than 125,000 products
- The screw-in threads are tapered and thus self-sealing
- The size of the screw-in thread depends on the lubrication point/manifold point.
The angle screw-in connectors for 4-mm and 6-mm pipe diameters are suitable for use in the low-pressure range only.
For connection of a line to a lubrication point or divider manifold point.
 | |
Suitable for hose external diameter | 6 mm |
Connection thread (d2) | M10 x 1 tapered |
Width across flats (SW) | 11 mm |
Material | Steel |
Surface | Zinc plated yellow |
Datasheets(X)
Last viewed
Adhesive-free plaster, blue, elastic, latex-free For all wounds and cuts
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc-plated blue passivated (A2K)
WÜPLAST® pan head screw with Z recessed head
PE backfill sealant
Double bolt For cam lock nut
pias® drilling screw, flat head with AW drive
Slip and tilt protection
U-shaped cutting knife
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Thread repair single set TIME-SERT® 14 pieces
