Bond and Seal Power structural adhesive - STRUCADH-KD-POWER-WHITE-CART-300ML

Bond and Seal Power structural adhesive - STRUCADH-KD-POWER-WHITE-CART-300ML - 1

Bond and Seal Power structural adhesive - STRUCADH-KD-POWER-WHITE-CART-300ML - 2

Bond and Seal Power structural adhesive

Name: Bond and Seal Power structural adhesive
Brand: Würth
SKU: 08932351

Structural adhesive Bond and Seal Power NSF
STRUCADH-KD-POWER-WHITE-CART-300ML

Art.-no. 08932351

EAN 4045989415649

All versions

Similar products

Price for selected packaging unit

Bond and Seal Power structural adhesive

Art.-no. 08932351

Price for selected packaging unit

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

Heavy-duty, elasticated hybrid structural adhesive

Excellent adhesive range and high level of initial strength

Excellent adhesion to almost all surfaces

Simple to attach components

Elastic with low stretchability

Can be painted over

Can be painted over before and after the skin has formed with all commercially available paint systems (except alkyd resin paints).

UV-resistant

Ideally suited to visible joints

Non-corrosive

Prevents metal corrosion

Low-odour, VOC- and solvent-free

Proof of Performance

NSF (P1) registered (no. 136996)

International approval for use in areas where food is processed or stored.

Notice

In the case of B+S Power, an additional layer can be added within the skin formation time. Due to the multitude of different paints and coatings, preliminary tests must be performed to check compatibility. Two-component epoxy paints are compatible. Do not allow this product to come into contact with alkyd resin paint systems.

Since the elasticity of the paint is lower than that of the adhesive/sealant, cracks may form in the paint around the joint.

Application area

Zinc	⎷¹	⎷⁴	⎷¹	⎷¹
Plastics	ABS	⎷²	⎷²	⎷²	x
	GFRP	⎷²	⎷²	⎷²	⎷
	Rubber/neoprene	x	x	x	⎷
	Dense foams	⎷²	⎷²	⎷²	⎷
	PE	x	x	x	x
	PMMA	⎷⁵	⎷⁵	⎷⁵	-
	Polyamide	⎷⁵	⎷⁵	⎷⁵	⎷
	Polycarbonate = PC	⎷⁵	⎷⁵	⎷⁵	-
	Polystyrene (not foam!)	⎷²	⎷²	⎷²	-
	PP	-	-	-	-
	PTFE	-	-	-	-
	Polyurethane = PU	⎷²	⎷²	⎷²	⎷
	Hard PVC	⎷²	⎷⁴	⎷²	⎷
	Silicone	-	-	-	-
	Expandable polystyrene	-	-	-	-
Surface must be pre-treated,please refer to the technical data sheets in accordance with the application. 1. Prime with primer for metal 0890 100 61 2. Prime with primer for p/w/s 0890 100 62 3. Pre-treat with deep-penetrating primer 0890 545 10 4. Pre-treat with activating cleaner 0890 100 60 5. Varioprimer safe + easy, 0890 024 021/0890 024 101
Bond + Seal products		B+S 0890 100 1 - 6 0890 100 111 - 3 0890 100 181 - 3 0890 100 11 + 13	B+S Power 0893 235 1 0893 235 2 0893 235 3	B+S Fast 0890 100 710 0890 100 720 0890 100 730	B+S Combi 0893 236 110 0893 236 120 0893 236 130
Metal	Aluminium	⎷¹	⎷⁴	⎷¹	⎷¹
	Lead	x	x	x	x
	Stainless steel	⎷¹	⎷⁴	⎷¹	⎷¹
	Copper	⎷¹	⎷¹	⎷¹	⎷¹
	Brass	⎷¹	⎷¹	⎷¹	⎷¹
	Steel/iron	⎷¹	⎷⁴	⎷¹	⎷¹

Delicate natural stone (e.g. marble)	-	-	-	-
Natural stone, brick	⎷²	⎷²	⎷²	⎷²
Cement fibreboards	⎷³	⎷³	⎷³	⎷
Others	Enamel	⎷⁵	⎷⁴	⎷⁵	⎷⁴
	Glass	⎷⁵	⎷⁴	⎷⁵	⎷⁴
	Fibreglass	-	-	-	-
	Mirrors	-	-	-	-
	Porcelain, ceramic, tiles	⎷⁵	⎷⁴	⎷⁵	⎷⁵
	Paper	⎷	⎷	⎷	⎷
	Cardboard	⎷	⎷	⎷	⎷
	Fabric	-	-	-	-
	Leather	-	-	-	-
Surface must be pre-treated,please refer to the technical data sheets in accordance with the application. 1. Prime with primer for metal 0890 100 61 2. Prime with primer for p/w/s 0890 100 62 3. Pre-treat with deep-penetrating primer 0890 545 10 4. Pre-treat with activating cleaner 0890 100 60 5. Varioprimer safe + easy, 0890 024 021/0890 024 101
Bond + Seal products		B+S 0890 100 1 - 6 0890 100 111 - 3 0890 100 181 - 3 0890 100 11 + 13	B+S Power 0893 235 1 0893 235 2 0893 235 3	B+S Fast 0890 100 710 0890 100 720 0890 100 730	B+S Combi 0893 236 110 0893 236 120 0893 236 130
Painted surfaces	2-component paints, stove enamels, cathodic dip coating, painted panels	⎷⁴	⎷⁴	⎷⁴	⎷⁴
Wood and engineered woods	Wood (including MDF, chipboard)	⎷²	⎷²	⎷²	⎷²
	Laminated panels (Resopal, Ultrapas)	⎷⁴	⎷⁴	⎷⁴	l
	HPL	⎷⁴	⎷⁴	⎷⁴	⎷⁴
	Decorative panels	⎷	⎷	⎷	⎷
	Cork	⎷²	⎷²	⎷²	⎷
Stone and construction materials	Concrete	⎷²	⎷²	⎷²	⎷²
	Bituminous substrates	-	-	-	-
	Aerated concrete, gypsum, gypsum plasterboard	⎷³	⎷³	⎷³	⎷³
	Artificial stone (Corian, Varicor)	⎷²	⎷²	⎷²	⎷

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For dynamically loaded structural bonded connections and seam and joint sealing in bodywork, vehicle and caravan construction, railway carriage and container construction, metal and equipment construction, air-conditioning and ventilation duct construction, in the food industry, and much more.

Instructions

The substrates must be clean, dry and free from grease. For pre-treatment, please refer to the optimisation table in the technical data sheet.

Cut off the threaded spout, screw on the nozzle and cut it to the required width. Apply the adhesive using a suitable application gun. We recommend a minimum adhesive layer thickness of 3 mm to harness the benefits of thick-coat bonding.

For more information, please refer to the technical data sheet.

Contents	300 ml
Container	Cartridge
Chemical basis	Hybrid polymer
Colour	White
Min./max. skin-formation time	30-40 min
Full curing speed/conditions	3 mm/d / 23°C and 50% relative humidity, moisture curing
Min./max. processing temperature	5 to 40 °C
Min./max. temperature resistance	-40 to +90 °C
Short term temperature resistance max. /conditions	150 °C / after 16 hours
Min. tensile strength	3 N/mm²
Min. combined tension and shear resistance	2 N/mm²
Max. change in volume	2 %
Max. volume change/conditions	2 % / in accordance with DIN 52451
Short-term resistance against	Mineral oils Fuels Animal fat Animal oils Vegetable fat Vegetable oils
Shelf life from production/conditions	12 Month / at max. 25°C
Silicone-free	Yes
Solvent-free	Yes
PVC-free	Yes
VOC-free	Yes
Isocyanate-free	Yes
Ultraviolet resistance	Yes
Sustainability	Pollutants / Emissions

Required accessory:

Product

Description

Quantity

Price
/PU

Juniorfix pneumatic application gun

CARTGUN-PN-JUNIORFIX-310ML

MASTER

Art.-no. 0703891310

Powerful and lightweight pneumatic application gun for applying products in cartridges. Ideally suited for adhesives and sealants with high and low viscosities.

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additional accessory:

Product

Description

Quantity

Price
/PU

Cartridge cutter

CARTKNFE

Art.-no. 071566 09

For cutting plastic cartridges and precision cutting of plastic application nozzles to desired length and angle

x 1 pcs

HaftClean activating surface cleaner

CLNR-STRUCADH-ACTIVATINGCLEANER-400ML

Art.-no. 089010060

Surface optimisation of non-porous surfaces

Adhesive remover

CLNR-STRUCADH-REMOVER-400ML

Art.-no. 089010063

Solvent mixture for dissolving/removing adhesives and sealants

Application nozzle Standard For 310 ml plastic cartridges

NOZ-SEAL-SCREW-CLEAR-CART-310ML

Art.-no. 0891653

Coarse thread

x 25 pcs

IPA isopropanol cleaner

UNICLNR-(IPA-CLEANER)-500ML

Art.-no. 0893223500

For universal use

Tex-Rein cleaning cloth

CLNCLTH-(TEX-REIN)-27X38CM-150PCS

Art.-no. 0899810

Extra fine cleaning cloth for dust and lint-sensitive areas

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Additive article:

Product

Description

Quantity

Price
/PU

HaftClean activating surface cleaner

CLNR-STRUCADH-ACTIVATINGCLEANER-400ML

Art.-no. 089010060

Surface optimisation of non-porous surfaces

Adhesive remover

CLNR-STRUCADH-REMOVER-400ML

Art.-no. 089010063

Solvent mixture for dissolving/removing adhesives and sealants

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Suitable glove:

Product

Description

Chemical protective glove, Butyl

Description:

Permeation level: 2

Gas-tight and resistant to exhaust gases produced by combustion processes

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 1

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 2

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.