Brake fluid DOT 4 For hydraulic brake systems

Name: Brake fluid DOT 4 For hydraulic brake systems
Brand: Würth
SKU: 089200925

Brake fluid DOT 4
BRKFLUD-(DOT 4)-0,25LTR

Art.-no. 089200925

EAN 4045989989799

All versions

Price for selected packaging unit

Brake fluid DOT 4 For hydraulic brake systems

Art.-no. 089200925

Price for selected packaging unit

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

Prescribed for various VW/Audi, Seat and Skoda vehicles

Meets and exceeds the specifications: SAE J 1703, 1704, FMVSS 116, DOT 3 and DOT 4

Brake fluids can be mixed with any other commercial product that satisfies the following test requirements: FMVSS 116, SAE J 1703, 1704 or ISO 4925.

Formulated on the basis of glycol ethers

Excellent corrosion protection compared to ferrous and non-ferrous metals

High degree of thermal stability

Good rubber compatibility

Outstanding lubricating properties

Suitable for use in the hydraulic power transmission of clutch systems.

Notice

Change brake fluids according to the vehicle manufacturer instructions. Under no circumstance mix with automatic transmission fluids (ATF) or mineral oils. Avoid contact with painted surfaces, as brake fluids have a solvent effect on paints. Brake fluid is hygroscopic.

For canisters/drums: The tap must only be used to pour brake fluid. After use (and during storage), always seal the canister with the original lid. The taps do not ensure that the brake fluid is not enriched with humidity. Please alert your customers to the correct storage method. Observe the information provided by the vehicle manufacturer.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Contents	0.25 l
Container	Can
Colour	Colourless
Smell/fragrance	Characteristic
Chemical basis	Polyglycol ether
Shelf life from production	24 Month
Min. wet boiling point	155 °C
Min. dry boiling point	255 °C
Density	1.07 g/cm³
Density conditions	at 20°C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.