Cable clamp insert clip High pull-out forces
Cable clamp push-in clip
CBLCLMP-PLUGCLIP-GREY-(7-12MM)
Register now and access more than 125,000 products
Datasheets(X)
For fastening of cables NYM 3 x 1.5 or 5 x 1.5 on concrete or solid brick, where normal nail clamps cannot be used.
- 5 mm drill hole – knock in the plug clip with a hammer
- 6 mm drill hole – press in the plug clip manually
 | |
Colour | Light grey RAL 7035 |
Design | One side |
Min./max. grip range | 7-12 mm |
Width (b) | 17.5 mm |
Length (l) | 32 mm |
Diameter of hole (d) | 6 mm |
Min./max. temperature resistance | -30 to 80 °C |
Material | PA 6 - Polyamide |
Halogen-free | Yes |
Silicone-free | Yes |
Last viewed
Nozzle For manual riveting tool
Spirit level made of light metal
Pipe cable lug with inspection hole
Electronic solder no. 1
Basic sweatshirt
1/2 inch socket wrench insert For external TX screws, long
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Marking paint Neon
Hammer tacker ST 19 Ergonomic
1/2-inch impact socket wrench insert bi-hex, metric, short