Cavity wax PLUS
Cavity wax PLUS
CAVWAX-BEIGE-500ML
Register now and access more than 125,000 products
- High creep capability and very good penetration, effectively protects even hard-to-reach rebates
- Water-displacing effect, penetrates and displaces moisture
- Free from aromatic compounds, suitable for commercially available paints and rubber and plastic components
- High resistance to heat and good flexibility at low temperatures
- Optimal corrosion protection from a layer thickness of just 50 µ
- VOC reduced
- Very high solids content
- Yield: Aerosol ±180 g/m² at 50 µ dry/liquid (1,000 ml container) ±80 g/m² at 50 µ dry
The material temperature should be +10°C to +30°C. After use, turn aerosol can upside down and spray until nozzle is empty.
Datasheets(X)
For long-lasting protection of areas in vehicle body cavities prone to corrosion. Used for subsequent treatment of existing seals and for restoring corrosion protection after accident repair work.
Shake can well before use. Apply a thin coat of cavity wax using the pressure cup spray gun and the corresponding probe. Apply the spray directly or using the probe, depending on the area of use. Operating pressure: 6 bar
Inhoud | 500 ml |
Gewicht inhoud | 388 g |
Chemische basis | Mineral oil, paraffin waxes and corrosion protection additives in dearomatized gasoline hydrocarbons |
Colour | Beige |
Container | Aerosol can |
Dichtheid | 0.776 g/ml |
Voorwaarde dichtheid | at 20°C |
Houdbaarheid vanaf productie | 24 Month |
Voorwaarde houdbaarheid vanaf productie | at 10°C to 30°C |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain
Protective glove MultiFit Nitrile
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
Tension spring with double eyes DIN 2097, spring steel wire, zinc-plated steel
Flat washer For hexagon head bolts and nuts
Welding bolt, shape PT ISO 13918, copper-plated steel 4.8, shape PT
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Light-duty rope thimble DIN 6899, zinc-plated steel, blue passivated (A2K)
HSCo8 keyway end mill, short, triple blade, centre-cutting
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled