Cement board screw for attaching cemented panels to wooden substructures
Steel phosphated milling head H
SCR-CS-CMNT-CTRHD-H2-(PHR)-4X45
Art.-no. 018914 45
EAN 4011231243971
Register now and access more than 125,000 products
- 90° milling head with Phillips drive PH 2
- Threaded wood screw with 20° tip
- Hardened, phosphated steel
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d) | 4 mm |
Length (l) | 45 mm |
Thread length (lg) | 41 mm |
Head diameter (dh) | 8.0 mm |
Internal drive | H2 |
Material | Steel |
Surface | Phosphated |
Head type | Countersunk milling head |
Thread type | Wood screw thread |
Thread form | Single start thread |
Shape of tip | Tip |
Last viewed
Double nipple for compressed air with cone
Pin punch in accordance with DIN 6450 form C with hardened impact head
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1 Steel 8.8U, hot-dip galvanised
Multi-socket wrench 3/8 inch Assortment of 22 pieces
Hexagon bolt with shank ISO 4014, steel 10.9, plain
Flat connector Micro Timer (MT II+III) 1.6
Heat-shrink crimp and solder connector with colour indicator HIGH-END butt connector
Flat washer For hexagon head bolts and nuts DIN 125, A4 stainless steel
Chain riveter
Hexagon bolt with thread up to the head DIN 933, steel 8.8, plain