Charger clamp Fully insulated, 600 A
Charging clamp fully insulated 600 A
CHRGCLMP-STEEL-(ZN)-FULLINSU-RED-600A
Register now and access more than 125,000 products
Zinc-plated sheet metal; with copper-mesh strip as terminal connection
Each clamp side is reinforced by a zinc-plated brass insert
Cold-resistant insulation (Escorena Ultra EVA)
Cable connection up to 35 mm2, with cable crimping shoe:
- M6 bolt and serrated locking nut
- Strain relief
Weight: approx. 230 g
Datasheets(X)
Max. current | 600 A |
Colour | Red |
Length | 160 mm |
Opening angle | 45 Degree |
Width of mouth | 35 mm |
Material | Sheet steel |
Max. wire cross section | 35 mm² |
Last viewed
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long
Screw with flattened half round head and hexagon socket ISO 7380-1 steel 010.9, zinc-plated blue passivated (A2K)
1/2 inch impact socket wrench set inch hexagon Short, 11 pieces
Diesel injection cleaner
Oval-head screws with H cross recess DIN 7985, steel 8.8, plain
Flat blade fuse ATO ISO 8820-3
Pin contact 2.5 Uninsulated
GEFU® thread-rolling screw With Taptite 2000® thread, cylinder head and hexalobular drive
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
Body saw blade with flat adapter