Circlip DIN 471, spring steel
DIN 471 steel mech. applied zinc standard version
CRCLIP-SHFT-DIN471-A-(MZN)-12X1
Register now and access more than 125,000 products
For safely limiting freedom of movement — even when there are rotary movements of machine parts on shafts and in bore holes at a predefined level.
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can be used even at high speeds
- The rings can be removed quickly and easily using the correct pliers
Datasheets(X)
 | |
Suitable for shafts | 12 mm |
Suitable for groove diameter | 11.5 mm |
Internal diameter (d1) | 11.0 mm |
Outer diameter (d1) | 19 mm |
Eye width (a1) | 3.3 mm |
Width (b1) | 1.8 mm |
Thickness (s1) | 1 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Wire rope clamp DIN 741, zinc-plated steel
Support clip type SRZ
Chair and box angle bracket
Wood screw Hexagon head DIN 571, A4 stainless steel
Timing tool set 4 pieces, for VW Group 1.2-1.4-1.6-1.9-2.0, diesel
Additional print costs of NPH Classic/Circo/motorcycle plates
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Twist drill bit HSCO DIN 338 type RN
Snap ring for bearing with ring groove
Pan head tapping screws with recessed head H