Clamp W-QUICLIP PLUS
Clamp W-QUICLIP PLUS
CLMP-(DIGA-CS-2/3)-LOKA-(15-18)
Register now and access more than 125,000 products
- Lockable clips
- High retention forces
- Temperature resistance from -25°C to +80°C (up to +110°C for short periods)
- Can be installed with a variety of gas nailers
- Easy side attachment on DIGA® CS 2 gas nailer
- All sizes can secure a variety of pipe diameters
- Material: Polyamide 6
- Through hole ∅ 5 mm, which also allows conventional attachment using nail anchors or chipboard screws
For fast securing of plastic auxiliary installation pipes with light compressive strength, plastic armoured pipes with medium to high compressive strength and steel-armoured pipes in accordance with DIN EN 50086-1 on concrete substrates (normal weight concrete ≥ C 20/25 ≤ C40/50) in accordance with DIN EN 206 in sand-lime brick, solid brick and steel.
 | |
Material | PA 6 - Polyamide |
Colour | Grey |
Baseplate length (A) | 24 mm |
Baseplate width (B) | 16 mm |
Distance from centre of pipe to support (C) | 23 mm |
Min./max. grip range (ØD) | 14-18 mm |
Halogen-free | Yes |
Silicone-free | Yes |
Min./max. temperature resistance | -25 to 80 °C |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Twist drill bit HSS DIN 338 type RN 130°
Descaler
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Formwork nail SN 105 With intended rupture point
Metric double open-end wrench DIN 3110/ISO 1085
3/4" POWERDRIV® socket wrench insert metric, hexagon
Amo® III 7.5 type 1 window frame screw, countersunk milling head
TX bit G7 mm for Fein/Baier chucks
Mounting plate TIOMOS 1D with two-point attachment for assembly with ASSY or Euro screws
Raised countersunk head screw with H recessed head DIN 966, A4 stainless steel, plain
