Clamp washer
Clamping washer
WSH-CLMP-F.FTSCR-(MZN)-M12
Register now and access more than 125,000 products
Material: Mechanically galvanised steel
Captive screw fastener in conjunction with a full thread screw
- Minimal machining required, no special tool necessary
- Thanks to the clamp ring's slim design, it can even be retrofitted in many structures, without having to make any structural changes
The serrated side of the washer must point in the direction of the nut thread. Clamp washers must not be reused once the bolt has been removed.
The user must check all specifications for applicability to the current application.
Datasheets(X)
CAD data (available after login)
General engineering
Toys
Motor vehicles
Trolleys
Electrical equipment
Assembly:
- 1. Create the bore hole (bore hole diameter = nominal diameter of washer + max. 1 mm) or the oblong hole
- 2. Push bolt through the bore hole
- 3. Slide the clamp washer over the thread
 | |
Suitable for screw thread | M12 |
Nominal diameter (d1) | 12 mm |
Outer diameter (d2) | 21 mm |
Thickness (h1) | 3 mm |
Material | Spring steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Area of application | Machinery directive fulfillment |
Removal force | 1335 N |
Assembly force | 111 N |
Last viewed
ORSY®BULL series 5 top loader
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain
Blind rivet, flat head
Brake calliper socket wrench insert For MAN TGA/Atego 12 t
Hexagon socket set screw with pin ISO 4028, A2 stainless steel, 21H, plain
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated
Hexagonal bolt with shank
Pipe cable lug with inspection hole