Clamp washer
Clamping washer
WSH-CLMP-F.FTSCR-(MZN)-M8
Register now and access more than 125,000 products
Material: Mechanically galvanised steel
Captive screw fastener in conjunction with a full thread screw
- Minimal machining required, no special tool necessary
- Thanks to the clamp ring's slim design, it can even be retrofitted in many structures, without having to make any structural changes
The serrated side of the washer must point in the direction of the nut thread. Clamp washers must not be reused once the bolt has been removed.
The user must check all specifications for applicability to the current application.
Datasheets(X)
CAD data (available after login)
General engineering
Toys
Motor vehicles
Trolleys
Electrical equipment
Assembly:
- 1. Create the bore hole (bore hole diameter = nominal diameter of washer + max. 1 mm) or the oblong hole
- 2. Push bolt through the bore hole
- 3. Slide the clamp washer over the thread
 | |
Suitable for screw thread | M8 |
Nominal diameter (d1) | 8 mm |
Outer diameter (d2) | 16 mm |
Thickness (h1) | 2.2 mm |
Material | Spring steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Area of application | Machinery directive fulfillment |
Removal force | 445 N |
Assembly force | 156 N |
Last viewed
End cap set for Redoslide Z100-G sliding door fitting set, for aluminium clip front panel
Die holder DIN EN 22568 Performance
Guide rail For vertical installation box roller shutter systems with 25/25 mm slats
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)
Ribbed nuts
Nail anchor SHARK® Hammer TYPE SK A2
Apparatus castor with fixed holder
Twist drill bit HSCo DIN 338 type RN oxide
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)