Cleaning gun for air-conditioning units
Cleaning gun for air conditioning cleaner
CLNGUN-F.(A/C CLEANER)
Register now and access more than 125,000 products
It reliably loosens and removes bacteria, moulds and microorganisms and ensures safe and clean application.
Professional system: specifically designed for building air-conditioning units
- Mechanical and chemical cleaning meets the requirements of VDI 6022, Sheet 8
- The system is fully mobile and does not require a power or compressed-air connection
- Simple and fast: just screw on the can and start spraying
- The flexible, adaptable spray probe ensures application with minimal contamination of the surrounding environment due to precise spraying
- The high spraying pressure allows thorough rinsing of the evaporator and condenser via the spray probe
Ensure adequate ventilation, e.g. by opening windows.
Ensure that there are no ignition sources in the surrounding area during cleaning work and the flash-off time.
Do not switch on the unit again until the cleaning fluid has completely dried and flashed off to ensure full functionality and to prevent damage.
Datasheets(X)
Suitable for regular cleaning of split air-conditioning ceiling and wall units, especially in offices, commercial premises and public buildings. Ideal for professional maintenance teams and facility managers who want to ensure hygiene and efficiency standards.
The system enables targeted cleaning of the evaporator in the interior unit. Removal of dirt and deposits ensures that the condenser in the exterior unit continues to operate effectively, increasing the efficiency of the entire split unit.
Recommended for seasonal maintenance (at least once a year, ideally in spring and autumn) and if decreased air quality or increased energy consumption of the air-conditioning unit is detected.
Width x height x depth | 18.5 x 18.5 x 3 cm |
Product weight (per item) | 675.000 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Adapter K
Double bracket for base height adjuster type L
Tool holder with SDS-max drive arbour
All-rounder injectable mortar WIT-VM 250
Hexagon bolt with thread up to the head DIN 933, steel 8.8, plain
GEFU® thread-rolling screw with Taptite 2000® thread, flat head with hexalobular drive
1/2" socket wrench insert metric, bi-hex, short
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Round head screw with square neck DIN 603, steel 8.8, zinc-plated, yellow chromated (A3C)
Screw with flattened half round head and hexagon socket ISO 7380-1 A4-070 stainless steel, plain