Cold-shrink tape
Cold-shrink tape
SHRKTUB-CLD-GREY-50X0,5MMX15M
Register now and access more than 125,000 products
Highly flexible and adaptable polyethylene film
No folds are created during assembly
The film can take mechanical loads and is tear-proof.
Screw heads can be covered without difficulty
The adhesive is odourless and contains no solvents, chloro-hydrocarbons or aromatic hydrocarbons
No unpleasant odour during application or during subsequent operation of the plant
The cold shrink tape is UV-resistant when applied in a double layer
Even possible to apply outdoors
Datasheets(X)
For permanent airtight sealing of butt joints and sleeve joints of air ducts, folded spiral seam pipes and flexible pipes in pneumatic systems.
For powerful bonding between Aluflex and folded spiral-seam pipes without a screw connection.
Backing material | PE film |
Backing material thickness | 0.12 mm |
Colour | Grey (base material) |
Adhesive base | Active butyl natural rubber |
Barrier layer | Foil |
Width x length | 50 mm x 15 m |
Min. temperature resistance | -30 °C |
Max. temperature resistance | 70 °C |
Min. processing temperature | -10 °C |
Max. processing temperature | 45 °C |
Min. surface processing temperature | 1 °C |
Building material class | B2 - Normally inflammable |
Building material class conditions | in accordance with DIN 4102 |
Ultraviolet resistance | Yes, when double wound |
Free of lead (< 0.1 %) | Yes |
Free of tin (< 0.1 %) | Yes |
SVHC according to REACH < 0.1 % | Yes |
Solvent free (< 1 %) | Yes |
Free of chlorinated paraffins (< 0.1 %) | Yes |
Free of hydrocarbon plasticizers (< 0.1 %) | Yes |
Free of halogenated blowing agents (< 0.1 %) | Yes |
Free of hexabromocyclododecane (< 0.1 %) | Yes |
Free of scrap tyre granules | Yes |
Last viewed
Protective glove MultiFit Nitrile Plus
Square washer DIN 436, zinc-plated steel, blue passivated (A2K)
Spring cotter pin With single loop. Zinc-plated steel, blue passivated
Allen key
Hexagonal bolt with threading up to the head DIN 933, steel 10.9, plain
Linch pin
Hammer drill bit For large hammer drills with high impact energy
Mounting plate For VLB 60 and VLB 100
Aluminium handle strip
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)