Combi joist hanger 2.0 mm - JOISTHNG-COMBI-(EXCRANKED)-50X105X2,0

Combi joist hanger 2.0 mm - JOISTHNG-COMBI-(EXCRANKED)-50X105X2,0 - 1

Combi joist hanger 2.0 mm

Name: Combi joist hanger 2.0 mm
Brand: Würth
SKU: 0681350105

Joist hanger, combined, 2.0 mm
JOISTHNG-COMBI-(EXCRANKED)-50X105X2,0

Art.-no. 0681350105

EAN 4038898566304

All versions

Similar products

Price for selected packaging unit

Combi joist hanger 2.0 mm

Art.-no. 0681350105

Price for selected packaging unit

Quantity

x 50 pcs

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

Universal one-piece standard joist hanger (angled outwards) for load-bearing connection of timber joists with standard cross-sections to wood, concrete or steel.

Universal use

Wings angled outwards

Sheet metal hot-dip zinc-plated on both sides (DX51D + Z275) approx. 20 µm in line with EN 10327:2004

Application in utilisation class 1 and 2 in line with EN 1995:2013

Proof of Performance

European Technical Approval ETA-09/0015

Notice

Diameter of bolts/screws may only be max. 2 mm smaller than the diameter of the hole.

The respective basic conditions of the applicable anchor approval must be observed.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Load-bearing connection of timber joists to wood, concrete or steel.

Instructions

Suitable fasteners:

Ribbed nail in line with EN 14592: 4.0x25–100 mm

ASSY 3.0 combi according to ETA 11/0190: d = 10 mm

Bolts according to manufacturer specification: d = 10 mm

Recommended dowels for anchoring in concrete: W-BS; W-FAZ; W-VIZ; WIT-VM 250; WIT-UH 300


Width x height	50 x 105 mm
Thickness	2 mm
Number of D 5 mm holes in subcarrier nJ + main carrier nH	8 + 14 PCS
Number of D 11 mm holes in subcarrier nJ + main carrier nH	0 + 4 PCS
Weight	302 g
Depth of underside	80 mm
Material	Sheet steel
Surface	Hot dip galvanized
Width of wing on nut	42 mm
Approval	ETA-09/0015
Material designation	DX51D
Number of pieces	1 PCS
Depth of upper side	42 mm

Partial and complete nailing of Würth combination joist hanger 2.0 mm
Characteristic load capacities in kN of Würth combination joist hanger 2.0 mm with ring-shank nails
Art. no.	Size in mm	Complete nailing						Partial nailing
		F_z,down,Rk		F_z,up,Rk		F_y,Rk		F_z,down,Rk		F_z,up,Rk		F_y,Rk
		4x40	4x60	4x40	4x60	4x40	4x60	4x40	4x60	4x40	4x60	4x40	4x60
Characteristic load capacities in kN of combination joist hanger 2.0 mm with ASSY 3.0 joist hanger screws
Art. no.	Size in mm	Complete screwing						Partial screwing
		F_z,down,Rk		F_z,up,Rk		F_y,Rk		F_z,down,Rk		F_z,up,Rk		F_y,Rk
		5x40	5x50	5x40	5x50	5x40	5x50	5x40	5x50	5x40	5x50	5x40	5x50
Parameters of Würth combination joist hangers 2.0 mm in accordance with ETA-09/0015
Art. no.	Size w/h (mm)	Width (mm)	Height (mm)	Complete nailing						Partial nailing
Art. no.	Size w/h (mm)	Width (mm)	Height (mm)	n_H	n_J	k_H,1	k_H,2	e₁	e₂	n_H	n_J	k_H,1	k_H,2	e₁	e₂
Factor table for design values
Utilisation class	continuous	long	medium		short	short/very short			very short
0681 350 105	50/105	11,7	18,0	4,7	7,8	4,4	6,5	6,9	10,5	2,9	4,8	2,4	3,5
0681 350 135	51/134.5	18,5	25,8	7,8	12,7	5,2	7,5	10,4	15,3	4,6	7,4	3,1	4,5
0681 350 105	50/105	21,3	23,4	12,5	15,5	7,7	8,6	12,8	14,2	7,6	9,4	4,3	4,9
0681 350 135	51/134.5	25,6	28,1	19,7	23,4	8,6	9,7	17,1	18,7	11,4	14,0	5,2	5,8
0681 350 105	50/105	50	105	14	8	18,3	6,54	1268	645	8	4	10,8	4,02	518	409
0681 350 135	51/134.5	51	134,5	18	10	31,5	10,9	1225	927	10	6	17,8	6,44	507	593
1	0,462	0,538	0,615		0,692	0,769			0,846
2	0,462	0,538	0,615		0,692	0,769			0,846
Design value for load capacity: Fi,Rd = Fi,Rk × kmod/gM For combined effect of action, the following condition must be met: (F_{y, Ed}/F_{y, Ed})^2 ≤ 1
Notes: Load capacities are for wood with a characteristic bulk density Rk = 350 kg/m³. · Nail load capacities in accordance with EN 1995-1-1. Pull-out capacities for load capacity class 3 in accordance with DIN EN 1995-1-1/NA. · Würth ASSY joist hanger screws in accordance with ETA-11/0190. · The force Fz acts in the centre of the secondary beam. The force Fy acts on the top edge of the joist hanger. In the case of a load application below the top edge of the joist hanger, using the table values is a safe approach. At a different spacing of the force Fy, the load capacity can be determined in accordance with ETA-08/0184. · Partial nailing: On the main beam, the fasteners must be placed in the rows closest to the secondary beam. On the secondary beam, the fasteners must be evenly spaced over the height of the beam. Fasteners must always be placed in the upper and lower holes. · The main beam must be secured to prevent torsion. · The transverse strength of the main beam must be determined separately. · For one-sided connections on the main beam, the offset moment must be taken into account. · The specifications of ETA-08/0184 must be observed.

Required accessory:

Product

Description

Quantity

Price
/PU

Comb nail / anchor nail

RIDGNL-(A3K)-4X40MM

Art.-no. 0681940040

Galvanised steel, blue coated (A2K)

x 3000 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).