Combined abrasive fleece/cloth matting body (mixed corundum)
Combi matting body
MATBDY-COMBI-G180/150-60X40X6MM
Register now and access more than 125,000 products
High sanding effect
Additional abrasive cloths between the abrasive fleece
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Diameter x width x shaft diameter | 60 x 40 x 6 mm |
Colour | Red brown |
Material to be processed | Wood, Cr-Ni and other stainless steels, C-steel, Grey cast iron, Non-ferrous metal, Forged steel, Steels bands, Malleable cast iron, Deep-drawn steel, Injection-moulded zinc |
Last viewed
Twist drill bit HSCo DIN 1869 R3 type RN
Hammer drill bit Max Quadro-L Vario
Household glove
Hexagon socket set screw with pin ISO 4028, steel, 45H, plain
TiN 90° countersink DIN 335C
Countersunk head screw with hexagon socket
OrgaAer panel support
pias® drilling screw, countersunk head with AW drive
SC Speedcut end mill, ultra-hard steel 68 HRC, long DIN 6527L
Oil drain plugs sealing seat face milling tool set 15 pieces