Concrete screw with hexagon head W-BS/S - ANC-(W-BS/S)-(A2K)-WS13-5-25-6X60

Concrete screw with hexagon head W-BS/S - ANC-(W-BS/S)-(A2K)-WS13-5-25-6X60 - 1

Concrete screw with hexagon head W-BS/S - ANC-(W-BS/S)-(A2K)-WS13-5-25-6X60 - 2

Concrete screw with hexagon head W-BS/S

Name: Concrete screw with hexagon head W-BS/S
Brand: Würth
SKU: 5929126025

Concrete screw W-BS steel zinc plated type S
ANC-(W-BS/S)-(A2K)-WS13-5-25-6X60

Art.-no. 5929126025

EAN 4046777684896

All versions

Similar products

Price for selected packaging unit

Concrete screw with hexagon head W-BS/S

Art.-no. 5929126025

Price for selected packaging unit

Quantity

x 100 pcs

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

Highest loads and efficient installation. Ideal for fastening metal structures, zinc-plated steel

For anchorage in concrete and masonry

Extremely flexible application thanks to up to three effective anchorage depths (size 6-14)

Fastening can be adjusted up to two times after installation (size 6-14), for example in order to align railings or anchor plates (please refer to the installation instructions)

Very high loads

Very low spacing and edge distances thanks to very low expansion effect

Very fast and easy installation and immediate load-bearing capacity

Proof of Performance

European Technical Assessment ETA-16/0043 for individual fixing point, option 1, cracked and uncracked concrete:

Static and quasi-static action (dia. 6-14)

Seismic action, performance category C1 (dia. 6-14) and C2 (dia. 8-14)

Fire resistance R30, R60, R90, R120

European Technical Assessment ETA-23/0196 for anchorage in masonry

Static and quasi-static action (dia. 5-10)

Fire resistance R30, R60, R90, R120 (dia. 5-6)

European Technical Assessment ETA-16/0128 for anchors in a redundant non-structural system:

Cracked and uncracked concrete, (dia. 5 and dia. 6)

Hollow-core prestressed concrete ceilings C30/37-C50/60, (dia. 6)

Fire resistance R30, R60, R90, R120

DIBt National technical approval/general type approval Z-21.8-2090 for temporary anchorage in concrete (dia. 10-14, type S hexagon head)

In reinforced and non-reinforced and cracked and uncracked concrete C20/25 to C50/60

Use in fresh concrete

Multiple use

DIBt National technical approval/general type approval Z-21.1-2075 as bonded screw anchor for anchorage in concrete (dia. 10-14, type S hexagon head)

Use in combination with WIT-BS injectable mortar as WIT-BS bonded screw anchor

In reinforced and non-reinforced and cracked and uncracked concrete C20/25 to C50/60

Tensile capacity in hollow-core concrete ceilings, (dia. 6-10) - expert report no. 21641 - 2016

Fire resistance rating when exposed to fire according to the standard temperature time curve in masonry (Mz, KSL, KS) and reinforced concrete, (dia. 5 and dia. 6) - expert report no. 2101/173/18 - 2018

Notice

From size 8, we recommend the use of a suitable tangential impact driver for installation. The recommended maximum nominal torque must be observed.

When used in masonry, the stone-specific installation data according to ETA-23/0196 must be observed.

Application area

Steel supports

Brackets

Adjustment - subsequent aligning possible.

Create the drill hole

Clean the drill hole

Place screw

Screw in the screw

Considered installed when the head is close fitting

Screw out the screw max. 2x each by max. 10 mm. Underlay. Screw in

Considered installed when the head is close fitting. Lining max. 10 mm. The required embedment depth must be maintained as a minimum

Locate the tensioning strand

Mark the tensioning strand and locate the next one

Mark the tensioning strands. Specify the drilling range

Create the drill hole. Observe spacing

Clean the drill hole

Screw in the screw

Considered installed when the head is close fitting. Observe the embedment depth/mirror thickness

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

Application area

Anchorages in concrete, individual fixing point with approval (dia. 6-14):

In normal weight concrete C20/25 to C50/60 (cracked and uncracked concrete)

Anchors in a redundant non-structural system in concrete, with approval:

In normal weight concrete C20/25 to C50/60 (cracked and uncracked concrete), (dia. 5 and dia. 6)

In hollow-core prestressed concrete ceilings C30/37-C50/60, (dia. 6)

Anchorages in masonry with approval (dia. 5-10):

In solid calcium silicate block and perforated block

In solid block masonry brick

Suitable for fastening medium to heavy loads in concrete and light to medium loads in masonry:

Fastening of e.g. metal structures, metal profiles, brackets, base plates, supports, cable trays, pipes, railings, construction site equipment etc. in in-place installation

Fastenings subject to seismic activity in earthquake-prone areas (only concrete)

Fastenings subject to exposure to fire

W-BS/S (galvanised steel) may only be used in dry indoor room conditions

Temporary fastening of construction site equipment may be carried out indoors and outdoors

For use in concrete < C20/25 and pressure-resistant natural stone (without approval)

Anchor size	6 mm
Anchor length (l)	60 mm
Attachment height (t fix 1)	25 mm
Attachment height (t fix 2)	20 mm
Attachment height (t fix 3)	5 mm
Thread diameter	7.5 mm
Nominal drill-bit diameter (d 0)	6.0 mm
Drill hole depth (h 1.1)	40 mm
Drill hole depth (h 1.2)	45 mm
Drill hole depth (h 1.3)	60 mm
Embedding depth (h nom1)	35 mm
Embedding depth (h nom2)	40 mm
Embedding depth (h nom3)	55 mm
External drive	WS13
Material	Steel
Surface	Zinc plated
Washer diameter	15 mm
Through-hole in the component to be connected (d f)	8.0 mm
Head type	Hexagon head
Type description	W-BS type S

Spacing between tensioning strands and drilled hole	a_p ≥ [mm]	50
Nominal drill ∅	d₀ [mm]	6
Through hole in the component being connected	d_f ≤ [mm]	8

Through hole in the component being connected	d_f ≤ [mm]	7	8	12	14	16	18
Width across flats	[mm]	AF10	AF13	AF13	AF15	AF17	AF21
Washer diameter	d_w [mm]	12,5	15	16	20	23	28
Screw-head height	h_n [mm]	5	6	9	10	10	12,5
Max. rated torque of tangential impact screwdriver	T_imp,max [Nm]	110	160	300	400	650	650
¹⁾ For anchors in a redundant non-structural system according to ETA-16/0128

5	35	0,66	0,91	80	80	40	80	6
6	35	0,66	0,91	80	80	40	80	10	10
6	55	1,17	2,37	80	80	40	80	10		185
8	45	1,8	0,91	80	80	40	80	25		300
8	65	1,8	2,14	80	80	40	80	25		300
10	55	1,83	1,69	80	80	40	80	45		300
10	75	1,91	2,44	80	80	40	80	45		300
5	35	0,31	0,46	58	80	35	58	6	8	100
6	35	0,31	0,46	58	80	35	58	11	10	100
6	55	0,31	0,46	58	80	35	58	11		100
8	45	0,46	0,46	58	80	35	58	27		200
8	65	0,46	0,46	58	80	35	58	27		200
10	55	0,63	0,63	58	80	35	58	37		200
10	75	0,63	0,63	58	80	35	58	46		200
5	35	0,46	0,6	80	80	35	80	2	4
6	35	0,46	0,6	80	80	35	80	3	9
6	55	0,46	0,6	80	80	35	80	3	9
8	45	0,66	0,6	80	80	35	80	16	14
8	65	0,66	0,6	80	80	35	80	16	14
10	55	0,86	0,6	80	80	35	80	23		185
10	75	0,91	0,77	80	80	35	80	23		185
8	65	0,17	0,66	80	80	35	80	6	10
10	75	0,37	0,91	80	80	35	80	5	14
Notes: For further details on compressive strength, spacing, edge distances and installation positions, please refer to ETA-23/0196 To determine the admissible load, the partial safety factor from ETA γ_M=2.5 was taken into account on the resistance side and a partial safety factor γ_F=1.4 on the impact side. The specified values apply to an individual anchor in masonry with f_vko: 0.15 [N/mm²] and σ_d: 0.2 [N/mm²]. For combinations of tensile and shear loads, bending torques or reduced spacing and edge distances, please see ETA-23/0196. Documentation for block removal must also be provided.

Admissible load under seismic activity performance categories C1 and C2 see European Technical Assessment ETA-16/0043	C1	x	x	x	x	x	x	x
	C2			x		x	x	x
Admissible load when exposed to fire (R30, R60, R90, R120), see European Technical Assessment ETA-16/0043

Additional accessory:

Product

Description

Quantity

Price
/PU

Blow-out bulb for drill hole cleaning

BLWOUTBULB-F.CLN

Art.-no. 0903990003

For cleaning drill holes with a smaller diameter

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).