Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
DIN 7 m6 plain steel
PIN-CYL-DIN7-UNHDND-M6-6X70
Register now and access more than 125,000 products
DIN 7 was withdrawn and superseded by DIN EN ISO 2338 (changes made to length definition and dome heights).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 6 mm |
Length (l1) | 70 mm |
Height of flat point (c) | 0.9 mm |
Standards | DIN 7 |
Material | Steel |
Surface | Plain |
Design | Unhardened |
Tolerance class | m6 |
RoHS-compliant | Yes |
Last viewed
Special peen planishing hammer With large, extra-thin face and straight pein
Wire end ferrule with plastic sleeve
Taper-grooved dowel pin DIN 1471, A1 stainless steel, plain
Hexagonal nut, low profile
Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
Socket wrench, hexagon, 3/4 inch Assortment of 15 pieces
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Sandpaper strip Useit® Superpad wood
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Blind rivet, flat head