Diamond cutting disc for asphalt Diamond cutting disc developed for road construction
Diamond cutting disc asphalt hand/joint saw
CUTDISC-DIA-ASPHALT-BR25,4-D600MM
Register now and access more than 125,000 products
- Special protective segments protect the main blade against undercut
- Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds
- If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
- Cut larger workpiece cross-sections into several sections (swing cut)
- Work without applying pressure – the weight of the machine is sufficient. Increased pressure causes increased wear.
- Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs – risk of injury!
- Despite the level of safety offered by the tool, always wear safety glasses and clothing while working
- Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions
- The direction arrow on the disc must match the machine's direction of rotation
- Must not be used for lateral grinding
- Use the appropriate protective hood
- Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
- If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Datasheets(X)
- For hand-held cutters and floor saws
- For dry and wet cutting
- For tarmac, concrete (abrasive), young concrete, mortar, plaster, screed, soft sand-lime brick
Diameter (Ø) | 600 mm |
Drill hole | 25.4 mm |
Segment height | 10 mm |
Segment thickness | 4.5 mm |
Number of segments | 36 PCS |
Segment connection | Laser |
Max. rotation speed | 3200 rpm |
Max. circumferential speed | 100 m/s |
Last viewed
Small parts shelf, accessories
Thread repair single set TIME-SERT® 14 pieces
Jogger S1P safety shoes
Flexible hose 3/8" crimp connection x 10 mm pipe connector For flexible cold and hot water connections
Brass drain valve For pneumatic brake systems
Release tool For round connectors with locking lugs
Overlapping cover cap, for hexalobular socket and AW drive
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Rechargeable battery Li-ion 18 V BASIC M-CUBE
Round wire snap ring and snap ring groove for shafts