Drilling screw, countersunk head with H cross recess pias® WN 212, A2 stainless steel, countersunk head H
pias A2 stainless steel plain countersunk head, H
SCR-DBIT-CS-A2-H2-3,9X16
ZEBRA PIAS
Register now and access more than 125,000 products
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Datasheets(X)
CAD data (available after login)
 | |
Other standard | WN 212 |
Material | Stainless steel A2 |
Surface | Plain |
Nominal diameter (d1) | 3.9 mm |
Length (l1) | 16 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 2.3 mm |
Internal drive | H2 |
Drill tip length (lp) | 2.6 mm |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Min. recommended substructure thickness | 1.5 mm |
Max. material thickness to be drilled through (metal) | 2.5 mm |
RoHS-compliant | Yes |
Last viewed
Twist drill bit HSCo DIN 338 type RN oxide
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain
Amo® III 7.5 type 1 window frame screw, countersunk milling head
Colour pin nail colour
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Hexagon nut DIN 934, steel I10I, plain
Tension spring with double eyes DIN 2097, spring steel wire, zinc-plated steel
Drilling screw, hexagon head with sealing washer pias®
Raised countersunk tapping screw, C shape with H recessed head