Dust protection door
Dust protection door set 2 pieces
DSTPROTDIVIDR-KIT-ADHTPE-L2,2XW1,1M-2PCS
Register now and access more than 125,000 products
Special dustproof but air-permeable fleece
- Protects adjacent rooms from dust whilst renovations are carried out
- Also screens the site and protects against unauthorised access to the room
- Air-permeable material allows for fresh air supply
High-quality, easy-to-open zip fastening on both sides
Flexible uses for all door dimensions up to a maximum of 1 m x 2.10 m
Easiest assembly - The dust protection door is attached with double-sided adhesive tape and can then be removed from most surfaces without leaving any residue
Reusable
Adhesive tape must not be exposed to direct sunlight once applied. The surface must be dry and free from dust or grease. Paint or varnish must be completely cured. Do not use on marble or granite surfaces, very absorbent surfaces or surfaces with insufficient inner stability, such as poorly adhering paint. We recommend performing an adhesion test in an inconspicuous area.
Datasheets(X)
All tasks during which adjacent rooms must be protected from dust or dirt, e.g. renovation, electrical or plumbing work, painting, dry walling or floor sanding.
Material | Polypropylene fleece |
Adhesive base | Acrylate dispersion |
Height | 2.1 m |
Width | 1.1 m |
Passageway height | 1.9 m |
Passageway width | 0.7 m |
Length of adhesive tape | 7 m |
Width of adhesive tape | 38 mm |
Min. processing temperature | 15 °C |
Max. usage duration | 7 d |
Shelf life from production | 24 Month |
Conditions to maintain shelf life from production | at 20°C and 50% humidity |
Last viewed
Raised contersunk head tapping screw, C shape with H recessed head DIN 7983, A2 stainless steel, plain. With cross recess.
Hexagon shoulder screw with short threaded pin DIN 610, steel 8.8, plain
Metal solder no. 2
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
Mechanical manual crimping pliers
Base plate for square-perforated panel system
SMART STEP EU+ HSS twist drill bit DIN 338
SMART STEP EU+ HSS twist drill bit DIN 338
Reducer, brass Metric according to EN 60423
Flat cover cap, for hexalobular socket and AW drive