EPDM butyl indoor sealing tape
EPDM sealing tape, inside butyl
SEALTPE-RAL-IN-EPDM/BUTYL-1,2X500MMX20M
Register now and access more than 125,000 products
Watertight and blocks vapour diffusion
Protects from moisture penetration from indoors into the masonry and thus prevents the risk of moisture-related structural damage
- Thanks to its high-quality and flexible material, the EPDM film remains permanently sealed and compensates particularly well for component movements
- Its high UV and weathering resistance make the EPDM film ideally suited for permanently secure sealing
- Reliable installation is also achieved on slightly uneven construction surfaces, when combined with EPDM sealing tape adhesive
- Good compatibility with bitumen
Tape cannot be plastered over.
Datasheets(X)
Permanent, reliable sealing of joints indoors, e.g. for window sills, floor-level windows and balcony doors, for outside door sills, conservatories and in façade areas.
- The surfaces must be dry, dust- and grease-free and capable of bearing loads.
- Installation: Cut the EPDM tape to the required length. Apply the EPDM sealing tape adhesive to the surface and wipe off with a spatula. Glue the EPDM tape to the surface and press on lightly using a press-on roller, while ensuring tension-free installation.
- On the frame/element, the sealing tape in the version with self-adhesive strips and/or with the sealing of components in contact with the ground must be fixed in place according to DIN18533 with a mechanical assembly.
Colour | Black |
Adhesive base | Butyl |
Chemical basis | Polyisobutylene natural rubber |
Width | 500 mm |
Thickness | 1.2 mm |
Length of roll | 20 m |
Design | With self-adhesive strips |
Min./max. temperature resistance | -30 to 75 °C |
Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102 |
Ultraviolet resistance | Yes |
Max. water-vapour diffusion resistance factor value µ | 270000 |
Elongation at break | 300 % |
Resistance against | Bitumen |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Classic base plate For number plate holders
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
System bolt For system connector SV 20 E
Threaded pin ISO 4027, steel, 45H, plain
Spring for DC aluminium wheel For safety spoke weights made from zinc
Hammer drill bit Max Quadro-S
Hexagon socket set screw with pin ISO 4028, A2 stainless steel, 21H, plain
3/8" socket wrench bi-hex, multi profile