EPDM butyl sealing tape for outdoor use
SEALTPE-RAL-OUTS-EPDM/BUTYL-1,2X300X20M
Art.-no. 0875350302
EAN 4050642138155
Register now and access more than 125,000 products
Weather-resistant and vapour-permeable to the outside
- High resistance to UV and weathering for permanent, reliable seals.
- Provides a reliable seal against water from outdoors.
- Water vapour permeable membrane allows water vapour to permeate from inside to outside, thereby preventing moisture-related structural damage.
- Excellent resistance to weathering for a permanent, highly reliable seal.
Material compatible, compensating
- Compensates particularly well for component movements.
- In combination with EPDM sealing tape adhesive, a secure installation can be achieved even on slightly uneven substrates.
- Good compatibility with bitumen.
- Tape cannot be plastered over.
- Not suitable for W2.2-E in DIN 18533: High influence from pressurised water ≥ 3 m immersion depth.
- Not suitable for W3-E in DIN 18533: Non-pressurised water on ceilings covered with earth.
- Not suitable for pressurised water according to DIN 18195-6.
Datasheets(X)
- For outdoor joints, e.g. window sills, floor-level windows, balcony doors, exterior door sills, conservatories and façades.
- 1.2 mm thick version for joints behind perimeter insulating materials.
- Complies with W1.1-E in DIN 18533: Ground moisture and non-pressurised water for floor panels and walls in contact with the ground.
- Complies with W1.2-E in DIN 18533: Ground moisture and non-pressurised water for floor panels and walls with drainage in contact with the ground.
- Complies with W2.1-E in DIN 18533: Moderate influence from pressurised water ≤ 3 m immersion depth.
- Complies with W4.E in DIN 18533: Spray water on the wall socket as well as capillary water in and under walls in contact with the ground.
- Substrates must be load-bearing, dry and free of dust and grease.
- To install, cut the sealing tape to the desired length, apply the EPDM sealing tape adhesive to the substrate and smooth out with a joint knife, apply the tape to the substrate and press lightly with a press-on roller.
- Ensure that the tape is not installed under tension.
- When using sealing tape with self-adhesive strips or when sealing components in contact with the ground, the tape must also be secured to the frame/element with a mechanical fixing according to DIN 18533.
Colour | Black |
Adhesive base | Butyl |
Chemical basis | Ethylene propylene diene natural rubber |
Width | 300 mm |
Thickness | 1.2 mm |
Length of roll | 20 m |
Design | With butyl adhesive strip |
Min./max. temperature resistance | -30 to 75 °C |
Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102 |
Ultraviolet resistance | Yes |
Max. water-vapour diffusion resistance factor value µ | 5882 |
Elongation at break | 300 % |
Resistance against | Bitumen |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Dry abrasive paper roll wood KP perfect KP perfect
MFD-S multi-purpose drill bit with straight shank
Special wrench set 5 pieces for plastic oil drain plugs
Universal sheet metal cutter set 7 pieces
WÜRTH MODYF FLUO hi-vis bib overalls class 2
Connection sleeve with bolt for system connector SV 20 E
System bolt with expanding socket for system connector SV 20 E
Vehicle cable FLY
Manual drive-in stamp for system connector
Protective glove White PU