Elevation triangle Aluminium (EN-AW-6063 T6)
Column triangular
COLMN-TRI-FLATROOF-ALU-(10-15GRD)
ZEBRA
Register now and access more than 125,000 products
- Variable adjustment in 5° increments
- Fully pre-assembled, meaning that the triangle can be attached to the roof without any preparatory work
An inspection must be carried out beforehand by an expert, as the individual features of the particular roof must be taken into account. Every elevated photovoltaic system must be selected and structurally calculated on a case-by-case basis depending on the location, roof structure and building load-bearing structure. The residual load-bearing capacity of the building must be evaluated beforehand for each system by a structural engineer.
Datasheets(X)
 | |
Limb length | 1230 mm |
Limb length 2 | 1300 mm |
Width | 33 mm |
Preset angle | 10° |
Possible elevation angle | 10° |
Material | Aluminium |
Surface | Plain |
Material designation | EN-AW-6063 T6 |
Product weight (per item) | 2572 g |
Last viewed
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
VDE screwdriver, flat slotted
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagonal bolt with flange DIN 6921, A2-70 stainless steel, plain
Pipe cable lug with inspection hole
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
3-pin connector 12V
Hammer rivet
Slotted countersunk head screw DIN 963, steel 4.8, zinc-plated, blue passivated (A2K)
Polishing pads