Elevation triangle Aluminium (EN-AW-6063 T6)
Column triangular
COLMN-TRI-FLATROOF-ALU-(20-30GRD)
ZEBRA
Register now and access more than 125,000 products
Fully pre-assembled, meaning that the triangle can be attached to the roof without any preparatory work
An inspection must be carried out beforehand by an expert, as the individual features of the particular roof must be taken into account. Every elevated photovoltaic system must be selected and structurally calculated on a case-by-case basis depending on the location, roof structure and building load-bearing structure. The residual load-bearing capacity of the building must be evaluated beforehand for each system by a structural engineer.
Datasheets(X)
 | |
Limb length | 1230 mm |
Limb length 2 | 1300 mm |
Width | 33 mm |
Preset angle | 20° |
Possible elevation angle | 30° |
Material | Aluminium |
Surface | Plain |
Material designation | EN-AW-6063 T6 |
Product weight (per item) | 2500.000 g |
Last viewed
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Straight screw-in connector, insertable For central lubrication units
Wad punch For oval eyelets
Universal car tyre valve
Twist drill bit HSCo DIN 338 type RN oxide
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
TIME-SERT® seat cutter
Collated nails and gas cartridge NG CS-2/3 HFB
Serrated locking nut A2 stainless steel, plain
K insulation pipe clamp With permanently integrated damping insert