Elevation triangle aluminium (EN-AW-6063 T6)
Column triangular
COLMN-TRI-ZEBRA-FLATROOF-ALU-(10-15GRD)
Register now and access more than 125,000 products
Fully pre-assembled, meaning that the triangle can be attached to the roof without any preparatory work
An inspection must be carried out beforehand by an expert, as the individual features of the particular roof must be taken into account. Every elevated photovoltaic system must be selected and structurally calculated on a case-by-case basis depending on the location, roof structure and building load-bearing structure. The residual load-bearing capacity of the building must be evaluated beforehand for each system by a structural engineer.
Framed modules in upright position
Framed modules crosswise
Frameless modules crosswise
Triangle mounting for lateral base rails with
cross rail joiners
Adjustment of elevation angle.
Triangle mounting for longitudinal base rails with hammer head bolts.
Fastening of module rails with cross rail joiners.
Datasheets(X)
 | |
Limb length | 1230 mm |
Limb length 2 | 1300 mm |
Width | 33 mm |
Preset angle | 10° |
Possible elevation angle | 10°, 15° |
Material | Aluminium |
Surface | Plain |
Material designation | EN-AW-6063 T6 |
Product weight (per item) | 2572.000 g |
Last viewed
REFILLO®mat filling can
Thread cutter for TIME-SERT® made of HSS
Stretch X dungarees
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Combi hexagon tapping screw with captive washer
Air spiral line, universal
Natural hand cleaner, plastic-free
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Hexagon bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Metric double box-end wrench with POWERDRIV®