End brush Steel, knotted, with shank
Spindle-mounted wheel brush/wire end brush, steel
CENTFBRSH-PWRDRL-30X0,5-S6
Register now and access more than 125,000 products
- Aggressive effect thanks to knotted wire
- The knots open more or less depending on the speed, and high speeds improve the brushing performance and service life
- For use on die grinders and drills
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases the required drive power and reduces the service life of the brush.
- In order to control the spread of the brush, use tool drives with adjustable speed.
- For the best performance, use a tool drive with at least 500 W.
- Always wear safety goggles and protective gloves when working with machine brushes!
Datasheets(X)
- Cleaning corners, recesses, holes
- For cleaning moulds/cast parts
- For removing paint and rubber residues
 | |
Diameter (D1) | 30 mm |
Sleeve diameter (D2) | 29 mm |
Usable length of wire (H) | 28 mm |
Wire diameter | 0.50 mm |
Length (L) | 72 mm |
Number of braids | 12 PCS |
Shank diameter (S) | 6 mm |
Material of wire | Steel |
Design | Braided |
Aggressiveness | Hard |
Suitable for cordless drills (points system) | 2 of 4 points |
Suitable for drill (points system) | 2 of 4 points |
Suitable for straight grinder (point system) | 4 of 4 points |
Max. rotation speed | 20000 rpm |
EN standard | 1083-2 |
Last viewed
HSS SMART STEP sheet metal conical drill bit
Flat washer For hexagon head bolts and nuts
Replacement foot For aluminium standing ladders with rungs
Twist drill bit HSCO DIN 338 type RN
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
Twist drill bit HSCO DIN 338 SMART STEP
Star-shaped For SPS dry abrasive paper dispenser systems
Tri-lock carabiner With tri-lock closure for maximum safety
1/2 inch cardan joint
pias® drilling screw, raised countersunk head with AW drive