Exhibition stand construction adhesive tape
Adhesive tape
FSTNGTPE-DB-ASSEMBLY-FAIRS-50MMX25M
Register now and access more than 125,000 products
No adhesive residues
The open side of the adhesive tape enables residue-free removal from the surface (recommended adhesion period: 2–3 weeks).
Excellent adhesion of the covered side
The side covered with silicone paper enables permanent adhesion on all surfaces found in the construction sector (e.g. stone, metal, plastic, glass etc.).
Can be removed by hand
Quick and easy to apply the tape.
With surfaces and plastics to be bonded that contain softeners, the softeners may alter the adhesive coat. This will impair the strength of the adhesive.
Datasheets(X)
For laying carpeting at trade fair stands. Other applications for which the material to be bonded needs to be removed again leaving no residues.
The surfaces to be adhered must be dry and free from dust, grease and silicone. To ensure proper adhesion, the tape must be sufficiently pressed onto the material to be glued.
The open (less adhesive) side is glued to the floor of the trade fair premises. The carpeting to be laid is applied to the covered (highly adhesive) side. This ensures proper adhesion of the tape to the carpeting; it can then be removed from the floor again, leaving no residues, at the end of the trade fair.
Adhesive base | Acrylate |
Backing material | Rayon fabric |
Colour | White (base material) |
Roll width | 50 mm |
Length of roll | 25 m |
Thickness | 0.22 mm |
Min./max. processing temperature | 15 to 30 °C |
Min./max. temperature resistance | -30 to 110 °C |
Ultraviolet resistance | Yes |
Moisture resistance | Yes |
Elongation at break | 40 % |
Shelf life from production/conditions | 18 Month / dry and dust-free storage area, 20°C and 50% relative humidity |
Last viewed
Base height adjuster, type U
1/2" socket wrench insert For TX screws, long
HSCo Multi Longlife machine tap for through holes DIN 371/376
Synthetic corundum flap wheels
Crimp cable lug, push connector PVC-insulated
Twist drill bit HSCo8 WN TYPE RH
MBS HW cylinder saw
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Façade construction screw Faba® type A with hexagon head and sealing washer