FIX connectors
FIX connector for SML pipes
FIX-CON-(F.SML-RO)-DN100

Register now and access more than 125,000 products
For the transition from SML pipes to plastic pipes
- Mount Fix connector on the pipe or moulded piece up to the spacer ring of the seal and fasten with the pipe clamp supplied (tightening torque: approx. 2 Nm).
- Pull on opening pin with pliers and remove rubber membrane
- Mark connection pipe for the necessary slide-in depth, apply lubricant and slide in
![]() | |
Suitable for min./max. pipe outer diameter | 104-110 mm |
Material | EPDM (ethylene propylene diene monomer rubber) |
DN nominal width | DN 100 |
Insertion depth | 65 mm |
Insertion length (L1) | 21 mm |
Suitable for min. pipe external diameter | 104 mm |
Suitable for max. pipe external diameter | 110 mm |
Length (L2) | 95 mm |
Diameter (D1) | 128 mm |
Datasheets(X)