FIX connectors
FIX connector for SML pipes
FIX-CON-(F.SML-RO)-DN80
Register now and access more than 125,000 products
For the transition from SML pipes to plastic pipes
Datasheets(X)
- Mount Fix connector on the pipe or moulded piece up to the spacer ring of the seal and fasten with the pipe clamp supplied (tightening torque: approx. 2 Nm).
- Pull on opening pin with pliers and remove rubber membrane
- Mark connection pipe for the necessary slide-in depth, apply lubricant and slide in
 | |
Suitable for min./max. pipe outer diameter | 75-90 mm |
Material | EPDM (ethylene propylene diene monomer rubber) |
DN nominal width | DN 80 |
Insertion depth | 60 mm |
Insertion length (L1) | 19 mm |
Suitable for min. pipe external diameter | 75 mm |
Suitable for max. pipe external diameter | 90 mm |
Length (L2) | 88 mm |
Diameter (D1) | 108 mm |
Last viewed
Half-length taper grooved pin ISO 8745 A1 stainless steel plain
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Cylinder saw adapter A2 With ejection function
Connecting sleeve for flexible plastic electrical installation pipes
1/2-inch impact socket wrench insert hexagon, metric, long
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
360° Spray bottle
Slotted countersunk head screw DIN 963, steel 4.8, zinc-plated, blue passivated (A2K)
Solid rubber wheel With steel rim for steel cylinder trolley
Wire end ferrule with plastic sleeve