FLEXEN® fleece protective hose
FLEXEN fleece protective hose
PROTHOSE-FLC-B1-25M-4X15
FLEXEN
Register now and access more than 125,000 products
Building material class B1, flame-retardant
Fleece according to Öko-Tex standard 100
Material free from harmful substances
Excellent sliding properties and high flexibility
Easy application, even on sleeves and bends
Tear-proof and crush-resistant
Protection against mechanical damage
Datasheets(X)
For insulating:
- Cold water pipes in accordance with DIN 1988
- Heating and hot water pipes not subject to requirements
Material | Polyester fleece |
Material of outer layer | PE - Polyethylene |
Colour | Silver coloured |
Insulation thickness x pipe diameter | 4 x 15 mm |
Insulating-material thickness | 4 mm |
Length of roll | 25 m |
Area of application in accordance with DIN 1988 | Yes |
Application range according to GEG | Without requirement |
Min./max. temperature conditions | -60 to 220 °C |
Heat conductance λ | 0.033 W/(m*K) |
Heat conductance λ conditions | at 10°C average temperature, according to test report 2271-P-12 |
Building material class | B1 - Of low flammability |
Building material class conditions | in accordance with DIN 4102, according to test report P-BWU03-I-6.5.106 |
Risk of corrosion | Fulfils the requirements |
Conditions for risk of corrosion | in accordance with DIN 1988-200 |
Suitable for copper pipe (outer diameter) | 12/15 mm |
Suitable for copper pipe (DN nominal width) | DN.. 10.. |
Suitable for steel pipe (outer diameter) | 13.5 mm |
Suitable for steel pipe (imperial) | 1/4 inch |
Suitable for steel pipe, DN nominal width | DN.. 8.. |
Free of halogenated blowing agents ( | Yes |
Free of hexabromocyclododecane ( | Yes |
SVHC according to REACH | Yes |
Free of chlorinated paraffins ( | Yes |
Free of boron tris-(2-carboxyethyl)-phosphine ( | Yes |
Free of polybrominated diphenyl ethers ( | Yes |
Free of polybrominated biphenyls ( | Yes |
Free of boron compounds ( | Yes |
Free of lead ( | Yes |
Free of tin ( | Yes |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Gypsum plasterboard anchor W-GS type K with reinforced centring point
VDE screwdriver, flat slotted
FLEXEN® cold rubber Plus S2 pipe insulation - 2 m
Hexagonal bolt with shank
Laguna S3 ESD safety shoe
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Solid carbide end mill Speedcut Inox, extra long XL, optional, four-lipped drill, uneven angle of twist gradient
Clamping pin/clamping sleeve
Hexagon socket set screw with pin ISO 4028, A2 stainless steel, 21H, plain
Paint spray Special, clear lacquer