FP wrap
Intumescent strip FP
STRP-INTUM-50MM-25M
Register now and access more than 125,000 products
The FP wrap is a system component for mortar and mineral board fire protection systems:
- Fire resistance classes up to EI 240 U/U
- Quick and easy installation
- No tools required
Only use in combination with FP mortar or FPMF board systems!
Datasheets(X)
For fire rated seal of metal and plastic pipes in massive walls, flexible partition walls and massive floors.
The wrap can be cut easily using a knife or a pair of scissors. Alternatively, the pre-cut strips are ready for use.
Wind the wrap around the non-combustible/combustible pipe or insulation in the appropriate number of layers, secure with tape and align flush with the surface of the structural element.
For details, see the installation instructions.
Thickness | 1.8 mm |
Length | 25 m |
Width | 50 mm |
Fire resistance rating | EI240 |
Colour | Anthracite |
Building material class | F - Of high flammability |
Material | Graphite |
Building material class conditions | in accordance with DIN EN 13501-1 |
Last viewed
Angled gear
Dent removal slide hammer
Sanding Block Set
Spare direct jet spray head For REFILLO® cans
Guide rail For FT 20 A folding door fittings
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Sealing ring, copper, shape A
Office container fitting set OrgaAer
Cylinder tapping screw, C shape with hexagon socket
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc-plated blue passivated (A2K)