Fabric hazard marking tape
Hazard warning fabric adhesive tape self-adhesive
HARDWARNFABTPE-SA-YELL/BLACK-R-50MMX50M
Register now and access more than 125,000 products
- Self-adhesive
- Excellent adhesion properties
- Dense, firm and tightly woven fabric
- Easy to tear off by hand
- Good abrasion resistance
- Mesh size of 80 mesh
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Yellow-black tape for permanent hazard points and obstacles
- Guidance past hazard points by directing to the left/right
- The adhesion surface must be dry and free from grease and dust.
Datasheets(X)
The solution for rough surfaces such as steel beams and walls of hazardous areas, such as edges of all kinds, work areas, car lifting platforms.
Colour | Yellow-black |
Material | Fabric - plastic coated |
Adhesive base | Natural rubber |
Length | 50 m |
Width | 50 mm |
Thickness | 0.29 mm |
Design | Right-pointing |
Last viewed
24 V Easy ABS/EBS repair plug For brake systems
Hexagonal nut with clamping piece (all-metal) DIN 980, steel 8, zinc-plated, blue passivated (A2K)
Twist drill bit HSCo DIN 338 type RN oxide
Wire cup brush Braided steel with M14 connecting thread
Hole saw HW
Long sanding belt
Light-duty rope thimble DIN 6899, zinc-plated steel, blue passivated (A2K)
Half-head strip nail, 34°, with ring-shaped shaft Steel, plain
Cetus work dungarees
Hexagon socket set screw with pin ISO 4028, steel, 45H, plain