Female thread plug-in nipple series 2000
Series 2000 female thread plug-in nipple
NPL-PN-S2000-IT-G1/4IN
Register now and access more than 125,000 products
High flow rate of up to 2100 l/min and a maximum operating pressure of 16 bar.
Enables optimum compressed air supply and output utilisation of compressed air consumers, resulting in greater productivity and lower energy costs.
Airtight connections
Low power consumption and high efficiency
Hardened steel nipples
For max. load-bearing capacity and long service life.
Exposed surfaces are chrome-plated, nickel-plated or galvanised.
High corrosion resistance – protected even under demanding conditions.
Series 2000 fittings comply with the European standard and have a nominal width of 7.6 mm.
Euro profiles are compatible with other compressed air fittings.
Material: Steel
Datasheets(X)
Material | Steel |
Connection thread | IT G 1/4 inch |
Length (L) | 36 mm |
Surface | ZN 8 silver |
Width across flats (SW) | 17 mm |
Max. pressure | 16 bar |
Flow capacity | 2.1 l/min |
Min./max. temperature resistance | -20 to 100 °C |
Last viewed
Sandpaper, waterproof
Metric ratchet combination wrench with ratchet function on both the box and open ends
Plastic multi-purpose ZEBRA Shark® anchor with collar
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated
Blind rivet, flat head
Threaded pin ISO 4027, steel 45H, zinc-plated, blue passivated (A2K)
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Bond + Seal structural adhesive
Long sanding belt