Fixanchor W-FA/HCR
Fixanchor W-FA steel HCR
ANC-(W-FA)-HCR-10-M6X67
Register now and access more than 125,000 products
- Very flexible application thanks to 3 effective anchorage depths
- Small spacing and edge distances
- Time-saving push-through installation
- For use in particularly corrosive environments such as swimming pools or tunnels
Datasheets(X)
CAD data (available after login)
- Anchors in a redundant non-structural system in non-load-bearing systems in concrete (size M6, cracked and uncracked concrete)
- For use in concrete < C20/25 and pressure-resistant natural stone (without approval/assessment)
- Fastenings under exposure to fire (size M6 only)
- Suitable for anchoring medium loads in concrete: Mounting of e.g. ceiling substructures, metal structures, suspensions, fire protection panelling, pipe and cable clamps under particularly aggressive environmental conditions
- Use in accordance with corrosion resistance class CRC V
- W-FA/A4 (stainless steel A4) is suitable for use in dry indoor areas or wet rooms and for use outdoors (including in industrial atmospheres and close to the sea), provided that particularly aggressive conditions are present. Particularly aggressive conditions include regular or continuous immersion in salt water, atmospheres with extreme chemical contamination e.g. in road tunnels, atmospheres containing chlorine in indoor swimming pools etc.
 | |
Metric anchor diameter | M6 |
Anchor length (l) | 67 mm |
Material | High corrosion-resistant steel, 1.4529, X1NiCrMoCuN25-20-7 |
Attachment height (t fix) | 10 mm |
Attachment height (t fix 2) | 20 mm |
Drill hole depth (h 1) | 55 mm |
Drill hole depth reduced (h 1, red) | 45 mm |
Drill hole depth (h 1.2) | 45 mm |
Effective anchoring depth (h ef) | 49 mm |
Effective anchoring depth reduced (h ef, red) | 30 mm |
Effective anchoring depth (h ef 2) | 39 mm |
Width across flats | 10 mm |
Nominal drill-bit diameter (d 0) | 6 mm |
Through-hole in the component to be connected (d f) | 7 mm |
Thread length (L th) | 30 mm |
Approval | ETA-02/0001 |
Last viewed
Useit® Superpad wood sanding disc
1/4-inch socket wrench insert, TX head For external TX screws
Bricklayers' trowel, forged Suitable even for the most demanding tasks, since handle and blade are forged from one piece
TX screwdriver with round shank
TX bit C 6.3 (1/4 inch) with hole
1/4 inch socket wrench insert TX with hole
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Threaded pin ISO 4027, steel 45H, zinc-plated, blue passivated (A2K)
Gas nozzle Tapered
Thread mandrel